Download - Fuji Xerox Printers

6. Slide the width guides until they rest lightlyagainst the edge of the print media stack.7. Insert the tray into the printer, and pushuntil it stops.Important• Do not apply excessive force on the tray. Doing socould damage the tray or the inside of the printer.Loading Paper in the Manual FeederThis section describes how to load paper in the Manual Feeder.Read the following instructions when loading paper in the Manual Feeder.Important• Load paper with the machine turned on.• When using the Manual Feeder, paper may skew when being printed. In this case, use Tray 1 or Tray 2.Note• When loading envelopes in the Manual Feeder, be sure to orient the paper correctly when loading. Formore information, refer to " Loading Envelopes" (P. 45).1. Adjust the paper guides of the ManualFeeder to the size of the paper to beprinted.Important:•Adjust the paper guides to the paper size. If youadjust the guides too tightly or too loosely, apaper jam may result.2. Hold the paper with both hands, with theside of the paper to printed on facingdownward. Insert the leading edge of thepaper until it touches the rear side of theManual Feeder. Hold the paper until it isslightly pulled into the printer.When the printer starts to feed the paper,release the paper.4.2 Loading Paper 77