Download - Fuji Xerox Printers

2.3 About the Ground Fault InterrupterThe printer has a ground fault interrupter on its rear left side.In the event of leakage current, the ground fault interrupter will automatically cut off thepower circuit to prevent leakage current, a short, or a fire from occurring.If the interrupter trips (if the button pops up), check and correct as necessary theinsulation condition of the electrical system of the printer and then press the button.If the insulation condition of the printer is not corrected, the interrupter trips againimmediately. In such a case, contact our Customer Support Center or your dealer. button buttonOnce a month, turn off the printer and test if the interrupter is functioning normally. Using afailed interrupter can cause electric shock.If your interrupter is not functioning normally, contact our Customer Support Center or yourdealers.Refer to• For information on how to test the ground fault interrupter, refer to P. 15.40 2 Basic Operation