Download - Fuji Xerox Printers

Example of the [Printer Settings] listIf an IP address is listed, skip thefollowing procedure.If an IP address is not listed, or ifyou want to change the current IPaddress, assign the setting usingthe following procedure.• Assigning an IP Address on the Control PanelUse the following procedure to assign a printer's IP address using the control panel.Depending on the network environment where the printer is to be installed, you also needto specify a subnet mask and gateway address. Consult your network administrator for thenecessary settings of the printer.To Set the IP Address1. Press the button on the controlpanel to display the menu screen.MenuReport / List2. Press the < > button until [Admin Menu] isdisplayed.Note• Press the button to return to the previous items.MenuAdmin Menu3. Press the < > or button toaccept the selection.[Wired Network] is displayed.Admin MenuWired NetworkNote• To deselect an desired item or return to the previousscreen, press the < > button.• Press the button to re-start from thebeginning.4. Press the < > or button toaccept the selection.[Ethernet] is displayed.Wired NetworkEthernet5. Press the < > button until [TCP/IP] isdisplayed.Wired NetworkTCP/IP6. Press the < > or button toaccept the selection.If [IPv4] is not displayed, press the < >button until [IPv4] is displayed.TCP/IPIPv41.2 Setting the Network Environment 23