Download - Fuji Xerox Printers

MessageCondition/Reason/ActionXXX CrtrdgMismatchXXX=Yellow, Magenta, Cyan, orBlackIt is almost time to replace X toner cartridge.Prepare a new toner cartridgeRefer to• "Consumables" (P. 182)• "Life of Consumables" (P. 183)XXX indicates one of the following: the Yellow Toner (Y), Cyan Toner (C), Magenta Toner (M), Black Toner (K), or Fuser Unit.NNN is a numeric value.Printer and Other Messages (In Alphabetical Order)MessageClean CTD SensorCondition/Reason/ActionThe CTD sensor (automatic density control sensor) is dirty. Clean it.Refer to"Cleaning the CTD Sensor" (P. 173)Close Front CoverClose Side CoverCooling downPlease wait...Feature DisabledPress SETInvalid JobPress SETThe front cover is open. Close the front cover.The side cover is open. Close the side cover.Printer internal temperature is too hot. Wait until the temperature cools. If themessage remains displayed on the control panel display even after the internaltemperature cools, contact our Customer Support Center or your dealer.The user is not registered to print in color when using the authentication function.Contact your system administrator.When the configuration of the printer on the print driver does not conform to theprinter you are using, this message appears.• Press the button to clear the message, cancel the current print job,and execute the next print job, if any.• Press the button to cancel the print job.• Make sure that the configuration of the printer on the print driver conforms to theprinter you are using.Refer to• "Printing the Reports/Lists" (P. 139)Limit ReachedPress SETLoad MMMXXXXXXXXLoad MMMYYYYYYYYUser has reached the printable page limit registered in authentication. Contact yoursystem administrator.MMM is out of paper, or the specified paper could not be detected in MMM. SupplyMMM with the following size, orientation, and type of paper.MMM indicates the number of the tray or the Manual Feeder.Refer to"Loading Paper" (P. 76)MMM=Tray 1, Tray 2, ManualFeederLoad NNNXXXXXXXXXXXXXXXXLoad NNNYYYYYYYYYYYYYYYY(NNN:Tray1,Tray2)Paper is not loaded in Tray N. Or, the size of the paper loaded in Tray N differs fromthe size set for printing with the print driver.Load paper of XXXXXXXX size and YYYYYYYY type in Tray N, and confirm thepositions of the paper guides of the tray.Refer to"Loading Paper" (P. 76)120 6 Troubleshooting