Download - Fuji Xerox Printers

Setting Example:Changing the Energy Saver SettingUse the following procedure to set a value with the control panel.In this example, we will set [Low Power Timer] (an interval at which the printer switches tothe Low Power mode) to [60 Minutes].1. Press the button to display themenu screen.MenuReport / List2. Press the < > button until [Admin Menu] isdisplayed.Note• If you went past the desired item, return to the item bypressing the < > button.MenuAdmin Menu3. Press the < > or button toaccept the selection.Move on to the lower hierarchy.Admin MenuWired NetworkNote• To deselect an desired item or return to the previousscreen, press the < > button.• Press the button to re-start from thebeginning.4. Press the < > button until [SystemSettings] is displayed.Admin MenuSystem Settings5. Press the < > or button toaccept the selection.[Low Power Timer] is displayed.System SettingsLow Power Timer6. Press the < > or button toaccept the selection.The current set value appears.Low Power Timer2 Minutes*7. Press the < > or < > button to display [60Minutes].Note• Holding down the < > or < > button scrolls throughthe options.Low Power Timer60 Minutes8. Press the button to accept thevalue.Low Power Timer60 Minutes*9. The setting is now complete.Press the button to return to the[Ready to Print] screen.Ready to Print5.1 Overview of the Menus 85