MacFinish 2D-USB Handleiding

More documents

Recommendations

Info

Page 60 MacFinish 2D-USB and MF8.x software Now, both lane numbers and corresponding times are simultaneously being filled! Automatically the following field underneath ‘Lane’ is selected. Follow the same procedure for all competitors. In the time fields, you can also enter the following options; DNF: Did not finish DNS: Did not start DIS: Disqualified NR: No result. To do that, press the 'Control'-key on the keyboard and click in a random time field and drag towards the required option: Hoofdstuk 8.2.2 : Races Not Finishing in Lanes For races not finishing in lanes (e.g. a 1500m or 5000m race), select ‘ID’ in the ‘Lane Popup Menu’, WITH THE RIGHT MOUSE BUTTON DOWN ! Now click the first field under ‘ID’ to select it. Now you can manually type the ID-number of each corresponding athlete. Press the ‘Return’ key to jump to the following field under ‘ID’. Follow the same procedure for all competitors. As soon as all ID-numbers have been completed, you can again enter the times in the way as explained above.
MacFinish 2D-USB and MF8.x software Page 61 Hoofdstuk 8.2.3 : Time Lines When Filling In Results As we have already explained before, you can attach vertical time lines to your photo-finish picture when completing results. To do so, select ‘Time Lines’ under the ‘Document’ menu. Select either ‘Screen’ or ‘Printer’ or both and finally select the color of the time lines. This can look like this; In the example above you can see that time lines can be helpful to distinguish the athletes that finished from the ones that were lapped, and still had to run one or more laps! The lapped athletes are on the photo, but do not show a time line, as they were not read out (on that position of the photo). Note; You can also enable the automatic display of 'Time Lines' in the 'Preferences' (see chapter 6.1.5). Hoofdstuk 8.2.4 : Absolute or Relative times in the ‘Result table’ Lets look at the following (theoretical) example of a cycling race, where the times have a prefix ‘C’ for ‘Corrected’ (we have typed a time of 5:26:47 for the winner and the other times are calculated by the pc). There is also a prefix ‘M’ as the start was given ‘Manually’ by the mouse button instead of by the start pistol or push button. If you would like to know the difference time between each participant, you can select the mode ‘Relative to Previous’ in the TOP OF THE ‘Time column’, WITH THE RIGHT MOUSE BUTTON DOWN ! Very useful for most cycling races, because then the participants will get the same time (group time) if there is LESS THAN 1 second between two successive participants. You can also display the time difference between each participant and the winner, by selecting “Relative to First’ (not shown).
Page 1:
MacFinish 2D-USB Handleiding Maart
Page 4 and 5:
Page 4 MacFinish 2D-USB and MF8.x s
Page 6 and 7:
Page 8 and 9:
Page 10 and 11: Page 10 MacFinish 2D-USB and MF8.x
show all

MacFinish 2D-USB Handleiding

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?