MacFinish 2D-USB Handleiding

MacFinish 2D-USB and MF8.x software Page 73
Hoofdstuk 11.3.3 : Flip Image
By selecting ‘Flip Image’, you can switch the direction in which the photo-finish image is displayed (to the left or to the
right).
Hoofdstuk 11.3.4 : Flip Lanes
Determines the order of lanes (1 to 25 / 25 to 1) in the vertical direction. This menu selection is only enabled (shown in
black) for images, which have already been saved on disk.
Hoofdstuk 11.3.5 : Crop
You can cut certain pieces of the MacFinish image through the 'Crop' function. Example:
We have selected a part that we wish to cut (between the two vertical lines) by pointing with the mouse, press the mouse
button, move the mouse and release the mouse button. Now we select ‘Crop’ under the ‘Document’ menu. It will remove
the part that we wanted to cut out, but this will have no influence however on the time display for the participants.
NEW FEATURE; If you have cropped a photo, and save the result, you can revert this back to the original (uncropped)
photo, by pressing the “shift” button on the keyboard, while you are opening that file !
Hoofdstuk 11.3.6 : Hide table and Show table
When selecting ‘Table’ from the ‘Document’ menu, the table of results will disappear or appear. The picture on the left
shows no ‘Table’, and the picture on the right includes a ‘Table’