You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Mantotherm Acrylic Based Grained Exterior Coating<br />
Acrylic Emulsion Based, Textured, Grained Exterior Coating<br />
PRODUCT DESCRIPTION<br />
Acrylic emulsion based, textured, grained, long lasting coating, which is applied and is also<br />
given pattern with a roller. The product is also suitable for use on interior walls for decorative<br />
purposes.<br />
AREAS OF USE<br />
Mantotherm Acrylic Based Grained Exterior Coating is used as the finishing coat coating<br />
material along with the suitable primer on cement based plaster, exposed concrete, fiber<br />
cement board and thermal insulation systems on the exteriors of any building.<br />
PRODUCT ADVANTAGES<br />
• Covers the surface defects thanks to the patterns and the thickness it forms as a result of<br />
the application.<br />
• Alkali resistant.<br />
• Resistant to outdoor weather conditions, and such weather conditions as rain, snow,<br />
excessively high or low temperatures.<br />
• Enables the water vapor to be discharged and winds the building thanks to its high water<br />
vapor permeability.<br />
• The colors of the product are fade and crack resistant.<br />
• Being water based, the product is odorless and is not harmful to human health and the<br />
environment.<br />
REFERENCE STANDARDS<br />
Certifications/Standards<br />
TS 7847<br />
Ministry of Public Works and Settlement Item No.<br />
Ministry of Public Works and Settlement Item No.: 04.522/A<br />
QUALITY CERTIFICATES<br />
TSE<br />
APPLICATION PROCEDURE<br />
Application Surfaces<br />
Outdoors Walls;<br />
- Cement based plasters (Mantotherm Primer applied)<br />
- Concrete (MegaSıva K and MegaSıva İ applied)<br />
- Fiber cement panels (Mantotherm Primer applied)<br />
- Thermal insulation systems (as finishing coat paint)<br />
Surface Preparation<br />
• Application surfaces should be sound, clean, dust free, and free from molding oils and other<br />
foreign substances. Such materials as mortar and cement residues should be peeled off.<br />
• Mantotherm Primer should be applied to such surfaces, which may have been painted<br />
previously or is to be newly painted.<br />
Application Methods<br />
• Mantotherm Acrylic Based Grained Exterior Coating should be stirred until it becomes<br />
homogenously consistent prior to the application.<br />
• The pelt roller should be thoroughly saturated with the product prior to, and the product<br />
should be spread on the entire surface at equal thickness with the roller during the<br />
application.<br />
• The patterns should be designed and developed from top to bottom with a coral roller or<br />
crystal roller while the product applied is wet. The thickness of the design pattern can be<br />
adjusted by adding water; however, it should be noted that the addition of excessive amount<br />
of water might cause the design pattern to fade out, impair the coating capability thereof<br />
and, depending on the season, cause delays in the drying process of the product.<br />
Application Recommendations<br />
• Pelt roller may be used to develop different design patterns. The application equipment<br />
used should be cleaned with water immediately after the application.<br />
• Paper tape should be used and adequate number of application workers should be employed<br />
in order to prevent the formation of undesired joint spots in the case of large surface<br />
applications.<br />
• In order to avoid any potential differences in shade on the facade, the product of the same<br />
batch number should be used on each facade.<br />
• The product should not be applied to such surfaces, which are exposed to risk of freezing<br />
within the next 24 hours, which are frozen or the frost of which is thawing.<br />
• Due care should be given to prevent the exposure of the material to direct sunlight in hot<br />
weather conditions.<br />
• The product should not be applied on extremely windy weather conditions or on hot surfaces,<br />
which are exposed to direct sunlight; and in the cases, where application is imperative under<br />
such conditions, the environment and the surface should be prepared for application in<br />
advance.<br />
• The product should not be applied in rainy weather conditions, and the application surface<br />
should be preserved from rain for a period of 24 hours.<br />
• Refer to our technical support hotline for recommendation on different surface applications.<br />
(PHONE: 444 4 595)<br />
Surface and Ambient Temperature<br />
The surface and ambient temperature should be between +5°C and +35°C whilst at<br />
application.<br />
Application Limits<br />
Dry to the touch<br />
Full dry time<br />
The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C<br />
temperature and 50% ± 5 relative humidity conditions. The values provided as per the table<br />
may vary depending on the surface and ambient conditions.<br />
APPLICATION INSTRUCTIONS<br />
Mixing Ratio<br />
Mantotherm Acrylic Based Grained Exterior Coating is a ready to use product. The<br />
product should be mixed with water in such volume that is equal to 10 % of the product<br />
volume as appropriate for the development of the preferred design pattern.<br />
Mixing Equipment<br />
• Low speed electrical mixer (400 cycles/min.)<br />
• Special tip stirring equipment<br />
Mixing Period<br />
The product should be mixed until a homogenous mixture is obtained. The product should be<br />
kept homogenous by stirring intermittently during the application.<br />
Application Equipment<br />
• Pelt roller<br />
• Coral or crystal roller<br />
Equipment Cleaning<br />
The equipment used should be cleaned with water following the application before the<br />
product dries.<br />
TECHNICAL PROPERTIES<br />
Chemical Structure: Acrylic emulsion based exterior coating<br />
Density: 1.80 ± 0.02 gr/cm 3<br />
Color: White and swatch card colors<br />
pH: 8.5 - 9.5<br />
Solid Matter Content: %78 ± 1<br />
Gloss: Opaque<br />
Flashing Point: Water based - Non-flammable<br />
Diluent: Water<br />
Minimum 2 hours<br />
Minimum 24 hours<br />
CONSUMPTION<br />
Recommended consumption amount for application on 1 m 2 surface is 1.0 - 1.3 kg/m 2 . The<br />
said value may vary, depending on the surface and ambient conditions.<br />
PACKAGING<br />
Mantotherm Acrylic Based Grained Exterior Coating is delivered in net 25 kg plastic<br />
buckets.<br />
SHELF LIFE<br />
The shelf life of the product is 12 months when stored within non-tampered original<br />
packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between<br />
+5°C and +25°C) environment.<br />
STORAGE CONDITIONS<br />
The product should be stored within non-tampered original packaging in dry (maximum relative<br />
humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment.<br />
It should not be exposed to direct sunlight.<br />
The container of the product should be closed firmly when not used.<br />
SAFETY PRECAUTIONS<br />
Please refer to the Safety Data Sheet (SDS) as appropriate for easy and safe application.<br />
144