PACKAGING Megaİzo PU Mastik LM is delivered in net 600 ml sausage – shaped packages (20 Sausage Shaped Packages/Box). SHELF LIFE The shelf life of the product is 12 months when stored within non-tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. STORAGE CONDITIONS The product should be stored within non-tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. It should not be exposed to direct sunlight. The product is cured in contact with air and should, therefore, be consumed rapidly upon the opening of the package. SAFETY PRECAUTIONS Please refer to the Safety Data Sheet (SDS) as appropriate for easy and safe application. 85
Megaİzo PU Mastik HM Polyurethane Based, Single Component, High Module Joint Sealant PRODUCT DESCRIPTION Highly elastic, high module polyurethane joint sealant for <strong>construction</strong> joints. AREAS OF USE Megaİzo PU Mastik HM is used for preventing leakage in the expansion and dilatation joints on floors, particularly in such spaces that are characterized by pedestrian and vehicle traffic (eg. parking garages and pavements/side walks), for the filling of the joints of such structures as bridge piers, dams, tunnels and concrete roads, in the cracks and gaps of reinforced concrete water reservoirs, seams of irrigation canals, roofs, rainwater gutters and the joints and seams of rainwater drainage pipes and antenna and chimney flashings. The product is also used for the filling of <strong>construction</strong> joints in warehouses and production spaces and such industrial floors, where such industrial operations as food and pharmaceutical production are carried out. The product adheres to such surfaces as ceramic tile, concrete, plaster, rock, marble, wooden, aluminum, metal plate, brick and enameled surfaces. It is also used for the assemblage of aluminum, wooden and PVC joinery. The product is also fit for use for filling and sealing the gaps amongst the blocks and details, which emerge in buildings for structural or decorative purposes, in balconies and terraces and wall flooring joint spots. It is suitable for use on indoors and outdoors horizontal and vertical surfaces. PRODUCT ADVANTAGES • Does not cause sagging, and highly resistant to wear and tear. • Resistant to high mechanical impacts. • UV resistant. • Free from effects caused by temperature changes and <strong>chemicals</strong>. • Cured without bubbling. • Maintains elasticity for a long period of time without any loss in volume. • Allows for paint application thereon subsequently. • A ready to use product which is applied easily and rapidly. PERFORMANCE Shore A hardness 50 DIN 53505 Elasticity module 0.6 N/mm 2 DIN EN ISO 8340 Tensile in 100 % elongation 1.8 N/mm 2 DIN 53504 Tensile strength 1.5 N/mm 2 DIN 53504 Rupture strength 7 N/mm 2 DIN 53515 Elongation at breaking %450 DIN 53504 Volume change < %5 The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. APPLICATION PROCEDURE Application Surfaces Indoors and Outdoors Walls; - Cement based plaster - Concrete - Ceramic - Plaster - Natural rock - Marble - Wooden - Aluminum - Metal plate - Brick - Enameled surface Indoors and Outdoors Floors; - Cement based trowel coating - Concrete - Ceramic - Plaster - Natural rock - Marble - Wooden - Aluminum - Metal plate - Brick - Enameled surface Surface Preparation • Application surfaces should be sound, clean, dust free, and free from molding oils and other foreign substances. Such layers that would reduce adherence as oil, grease, dirt, paint, cement foam and rust should be thoroughly cleaned prior to application. • Megaİzo PU Mastik HM adheres excellent to many surface types even without the need for primer application. However; in the cases, where the surface cannot be cleaned from dust completely or is likely to be exposed to high mechanical impact, joint butts should be applied MegaFilm İzo PU or MegaFilm İzo Epo, the surface preparation primer. Application Methods • Sausage formed Megaİzo PU Mastik HM should be placed into a gun with a suitable headpiece, and the gun should be directed through a 45° angle. • Megaİzo PU Mastik HM should be applied continuously at a slow rate, making sure the product fully contacts the joint butts and any air void is not allowed. • Megaİzo PU Mastik HM should, once the surface is filled, be smoothed by applying slight pressure toward the edges of the joints, making sure any overflowing is prevented, and should so be ensured to adhere to the edges. Application Recommendations • Especially in the case of deep joints, the product should be applied with porous backing rod in order to control the thickness and prevent trilateral bonding. • In the cases, where sharp edge lines or very clear joint edges are desired on the surfaces, on which Megaİzo PU Mastik HM is to be applied; masking tape should be used. The masking tape should be removed before the mastic is cured. • In the cases where paint application is intended on Megaİzo PU Mastik HM, a compatibility test is recommended to be conducted in advance. • Megaİzo PU Mastik HM should be consumed rapidly after the opening of the package as the curing of the product begins upon contact with air. • The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing. • The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 24 hours. • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595) Surface and Ambient Temperature The surface and ambient temperature should be between +5°C and +35°C whilst at application. Application Limits Curing time Film formation time The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. APPLICATION INSTRUCTIONS Mixing Ratio Megaİzo PU Mastik HM is a ready to use product. Mixing Equipment Megaİzo PU Mastik HM is a ready to use product. Mixing Period Megaİzo PU Mastik HM is a ready to use product. Application Equipment • Sausage gun • Scraper Equipment Cleaning The equipment used should be cleaned with acetone or polyurethane cleaner following the application before the product hardens. TECHNICAL PROPERTIES Chemical Structure: Moisture cured polyurethane Density: 1.25 gr/cm 3 Color: Gray / White, custom colors upon demand Temperature Resistance: - 40°C and +90°C 2.5 - 3 mm / 24 hours 45 minutes CONSUMPTION The consumption amount varies, depending on the depth and width of the joints on the application surface. Joint Width (mm) Joint Depth (mm) Joint Length (m) 10 8 7.5 15 8 5 20 10 3 25 12 2 30 15 1.33 86
- Page 1 and 2:
ADHESIVES MegaFix MegaFix K MegaGra
- Page 3 and 4:
Equipment Cleaning The equipment us
- Page 5 and 6:
Mortar Density: 1.85 ± 0.05 gr/cm
- Page 7 and 8:
CONSUMPTION The consumption amount
- Page 9 and 10:
Application Equipment • Steel not
- Page 11 and 12:
Equipment Cleaning The equipment us
- Page 13 and 14:
Application Equipment • Steel not
- Page 15 and 16:
Grain Size: ≤ 600 µm Color: Gray
- Page 17 and 18:
Equipment Cleaning The equipment us
- Page 19 and 20:
Application Equipment • Steel not
- Page 21 and 22:
Equipment Cleaning The equipment us
- Page 23 and 24:
Temperature Resistance: -15°C to +
- Page 25 and 26:
MegaPro Pastemix Polymer Emulsion B
- Page 27 and 28:
MegaEpoxy Epoxy Resin Based, Double
- Page 29 and 30:
MegaBlok Cement Based, Gas Concrete
- Page 31 and 32: ARTEFIX Cement Based Ceramic Adhesi
- Page 33 and 34: BRUFIX Cement Based Ceramic Adhesiv
- Page 35: JOINT FILLERS MegaFuga MegaFuga Sil
- Page 38 and 39: Consumption Amount Calculation Meth
- Page 40 and 41: CONSUMPTION The consumption amount
- Page 42 and 43: CONSUMPTION The consumption amount
- Page 44 and 45: Consumption Amount Calculation Meth
- Page 46 and 47: RECOMMENDED MegaFuga Rustik CONSUMP
- Page 48: Application Limits Useful time for
- Page 51 and 52: Megaİzo Lastik Mono Cement Based,
- Page 53 and 54: Megaİzo Lastik 7 Polymer Emulsion
- Page 55 and 56: Megaİzo Lastik 10 Polymer Emulsion
- Page 57 and 58: Megaİzo Lastik 15 Polymer Emulsion
- Page 59 and 60: Megaİzo Lastik 3 Hydrophobic Impre
- Page 61 and 62: PACKAGING Megaİzo Lastik 5 is deli
- Page 63 and 64: CONSUMPTION Recommended consumption
- Page 65 and 66: PACKAGING Megaİzo Kristalize is de
- Page 67 and 68: TECHNICAL PROPERTIES Chemical Struc
- Page 69 and 70: Equipment Cleaning The equipment us
- Page 71 and 72: Megaİzo PK3/PK4 - PK3/PK4 Plus - P
- Page 73 and 74: Megaİzo PU 7 Polyurethane Based, R
- Page 75 and 76: Megaİzo PU 10 Polyurethane Based,
- Page 77 and 78: Megaİzo PU 15 Polyurethane Based,
- Page 79 and 80: Megaİzo PU 6 Bitumen Modified, Dou
- Page 81: Megaİzo PU Mastik LM Polyurethane
- Page 85 and 86: Megaİzo Stoper Cement Based, Insta
- Page 87 and 88: Megaİzo File Reinforcement And Gla
- Page 90 and 91: REPAIR MORTARS MegaTamir İ MegaTam
- Page 92 and 93: MegaTamir K Cement Based Repair And
- Page 94 and 95: MegaTamir K Yapısal Cement Based S
- Page 96 and 97: MegaTamir Epo Epoxy Based Adhesive
- Page 98 and 99: MegaTamir EpoGrout Epoxy Based, Thr
- Page 101 and 102: FLOORING MATERIALS MegaZemin SL20 M
- Page 103 and 104: MegaZemin BYS Surface Hardening Mor
- Page 106 and 107: PLASTERS MegaSıva İ MegaSıva K M
- Page 108 and 109: PACKAGING MegaSıva İ is delivered
- Page 110 and 111: - Gas concrete surface: 17.5 - 18.5
- Page 112 and 113: PACKAGING MegaSıva Saten is delive
- Page 114 and 115: PACKAGING MegaSıva Perlitli is del
- Page 116 and 117: - Gas concrete surface: 1.5 - 2.5 k
- Page 118 and 119: CONSUMPTION Recommended consumption
- Page 120 and 121: PACKAGING MegaSıva Makine İç is
- Page 122 and 123: PACKAGING MegaSıva Makine Dıº is
- Page 124: MegaSıva Thermo Plaster Mortar For
- Page 127 and 128: MegaFilm Multipurpose Surface Prepa
- Page 129 and 130: MegaFilm Visko Environmental Friend
- Page 131 and 132: MegaFilm İzo Bitumen Emulsion Base
- Page 133 and 134:
MegaFilm İzo Epo Epoxy Based, Doub
- Page 136 and 137:
ADDITIVES & AUXILIARY MATERIALS Meg
- Page 138 and 139:
MegaAntiFreeze 10 Anti-Freeze Morta
- Page 140 and 141:
MegaClean Ready To Use Joint And Su
- Page 142 and 143:
Mantotherm Adhesive Mortar Adhesive
- Page 144 and 145:
Mantotherm Primer Acrylic Emulsion
- Page 146 and 147:
Mantotherm Dekominera - Lined Textu
- Page 148 and 149:
Mantotherm Exterior Paint With Sili
- Page 150 and 151:
Mantotherm Grained Exterior Coating
- Page 152 and 153:
Mantotherm EPS Thermal Insulation P
- Page 154 and 155:
Mantotherm XPS Thermal Insulation P
- Page 156 and 157:
Mantotherm Glass-Fiber Mesh Glass-F
- Page 158 and 159:
151
- Page 161 and 162:
k k k k k k k k k
- Page 163 and 164:
k k k k k k k k k k k k k k
- Page 165 and 166:
k k k k k k k
- Page 167 and 168:
Areas Of Use
- Page 169 and 170:
Areas Of Use
- Page 171 and 172:
Areas Of Use
- Page 173:
Areas Of Use