GE_OEC_9600_C-Arms

Status Menus
The available status menus and the items contained under each are listed below. Note
that a typical readout is listed for all applicable menu items.
Battery Status
CHARGE VOLTS |==> Refer to the Power Distribution
CHARGE CURRENT | section; Battery Charger PCB, and
LINE VOLTAGE _| Batteries.
FILAMENT B+ ==> See Filament Regulator Setup
EXIT THIS MENU
Heat Status
HOUSING HEAT
ANODE HEAT
THERMISTOR
EXIT THIS MENU
Refer to X-Ray Tube
AD/DA Status
Use this menu to read the AD/DA information being received by the
Analog Interface PCB.
After selecting this menu, scroll through the AD/DA channels listed below. To read the
voltage measured on the selected channel, press any key. The display will change to
show the channel number and the associated voltage.
CHANNEL NUMBER:
0 MEASURED KVP
1 MEASURED MA
2 FILAMENT B+
3 VIDEO LEVEL
4 HOUSING THER.
5 DOSIMETER (not used)
6 CAMERA POSITION
7 CAMERA IRIS WIPER
8 TAP VOLTAGE
9 LINE VOLTAGE
10 CHARGE CURRENT
11 CHARGE VOLT
12 FILAMENT CURRENT
13 SPARE
14 SPARE
15 SPARE
EXIT THIS MENU