GE_OEC_9600_C-Arms

2 Appendix
PAINT KITS
PART NUMBER DESCRIPTION
900524-11 Paint Kit, Elite Gray, Texture
900524-12 Paint Kit, Rhinestone, Texture
900524-13 Paint Kit, Windswept, Texture
TORX CRESTCUP TORQUE SPECS
CAUTION:
The torque specifications given in the table below apply only for hardware
being installed into steel or aluminum. When installing hardware into
plastic mounted fasteners, tighten only until snug.
TORX SCREW
SIZE
NOMINAL
TORQUE VALUE
ACCEPTABLE
RANGE
4-40 6 lbs./in 5-8 lbs./in
6-32 15 lbs./in 13-16 lbs./in
8-32 22 lbs./in 21-24 lbs./in
10-32 30 lbs./in 28-31 lbs./in
MATERIAL SAFETY DATA SHEETS
Refer to the 9600 Operators Manual for MSDS sheet information.
CERTIFIED COMPONENTS
Certified components used in the 9600 Mobile Imaging System include the following:
Beam Limiting Device*
Image Intensifier Assembly*
Spot Film Device (Cassette Holder - optional) *
X-ray Control Assembly*
X-ray Generator Assembly*
X-ray Tube Assembly
* Complete Report of Assembly, FDA Form 2579 whenever the following
assemblies are replaced in their entirety, per 21 CFR 1020.30 (d) (1) and (2).