GE_OEC_9600_C-Arms

Panel Diagnostics
PANEL LED TEST - Tests all control panel LED’s and fluorescent
display
PANEL KEY TEST -Tests all control panel keys and displays the
corresponding hex code
PANEL KV/MA TEST - Tests operation of kV and mA controls
SPEAKER TEST - Tests speaker mounted to Control Panel
Processor PCB
PANEL SOFTWARE - Displays software revision for the
Control Panel Processor PCB
EXIT THIS MENU
Calibrate Data
A-Vector Table D1-Vector Table H2-Vector Table
B-Vector Table E-Vector Table H3-Vector Table
B1-Vector Table F-Vector Table K-Vector Table
C-Vector Table G-Vector Table L-Vector Table
D-Vector Table H1-Vector Table
LAST CALIBRATE (Contains date of last calibration and initials of
calibrator)
NO. OF WRITES
EXIT THIS MENU
Event History
Events codes are reported in reverse order, with the most recent event first. The events
are stored in the EEPROM TABLE and the LOCAL TABLE. Refer to
Event History files for further information.
The format for event code reporting is:
E - NN = HHHH
where:
NN = event count (1-128)
HHHH = the event code
Select EVENT HISTORY, press any key, and scroll through the items listed below.
EEPROM TABLE - Last 128 events (beginning with most recent) stored in EEPROM.
This table is only updated when a fatal system error occurs.
LOCAL TABLE - Last 128 events (beginning with most recent) stored in RAM.
LAST FATAL ERR - Date and time of last fatal error
TOTAL FATAL ERR - Gives count of total errors; FATAL CNT. = n
EXIT THIS MENU