GE_OEC_9600_C-Arms

4 Workstation Control
FRONT PANEL
The following functions are controlled from the Front Panel Switches:
• Averaging
• Fluoro
• One-shot
• Enhanced One-shot(Digital Spot)
• Recall
• Save
• LR
This panel cannot be repaired in the field. If problems arise, it must be replaced. The
defective panel should be sent to the factory for repair. Refer to the Illustrated Parts
Manual for part numbers.
Diagnostics are included in the system software that allow testing of the front panel
controls.
KEYBOARD
The QWERTY Keyboard is similar to the keyboard used on a computer, but contains
specially labeled keys that control system functions. The alpha-numeric keys are used
for patient annotation and system control. A drawing of the QWERTY keyboard is
contained in the System Overview section of the manual.
This keyboard cannot be repaired in the field. If problems arise, it must be replaced. The
defective keyboard should be sent to the factory for repair. Refer to the Illustrated Parts
Manual for part numbers.
TRACK PAD
The Track Pad contains function keys for control of system operations, along with a
force-sensitive-resistor array (FSR) analog interface that acts as an electronic trackball.
Drawings of the Track Pad Panels are contained in the System Overview section of the
manual.
This panel cannot be repaired in the field. If problems arise, it must be replaced. The
defective panel should be sent to the factory for repair. Refer to the Illustrated Parts
Manual for part numbers.
The Track Pad Panel contains buttons which control specific system operations. A
pressure-sensitive Track Pad is used to control cursor movement on the monitor
screens. Diagnostics are included in the system software that allow testing of the
TrackPad panel.