GE_OEC_9600_C-Arms

More documents

Recommendations

Info

Image Storage 7 7. The screen displays: SYSTEM Configuration Set System Configurations Imaging Defaults 8. Select Set System Configurations, then press ENTER. 9. The screen displays: SET CONFIGURATION Line Frequency (Hz) 60 System Model VAS Cine Disk NONE Language English VCR1 Sony VCR2 Sony NOTE: This screen display is only one example; yours may differ according to your system configuration. 10. Select the Cine Disk menu item, and then using the left or right arrow keys, toggle through to ALTA4 or ALTA30, whichever is appropriate. OR, if changing the line frequency: Select the Line Frequency (Hz) configuration, then with the left or right arrow keys, select 50 Hz or 60 Hz frequency. IMPORTANT... THE FOLLOWING STEPS (11 - 30) MUST BE PERFORMED IN THE ORDER PRESENTED. 11. After selecting Cine Disk, or Line Frequency, press ENTER. 12. The following will be displayed at the bottom of the configuration menu: PRESS SETUP TO CONFIRM 13. Press the Setup Options key.
8 Image Storage 14. The following will be displayed at the bottom of the configuration menu: CHANGING CONFIGURATION Restart Workstation 15. Remove the <strong>OEC</strong> access disk. 16. Press ESC twice. 17. System will now reboot. 18. Insert the <strong>OEC</strong> access disk. 19. Press the Setup Options key. 20. The screen displays: SETUP OPTIONS Set Today's Date Set the Correct Time Software ID Screen Access Level 2 (Service) 21. Select Access Level 2 (Service), then press ENTER. 22. The screen displays: Service Options Run System Diagnostics Prepare CINE Disk Backup MainFrame Disk Video Calibration Access Mainframe Menu Shot Log File System Configuration 23. Select Prepare CINE Disk, the press ENTER.
Page 1 and 2:
SERIES9600 SERVICE MANUAL ERROR CO
Page 3:
START-UP AND SOFTWARE BOOT Loading
Page 6 and 7:
SRAM Card Error Codes If an error o
Page 9 and 10:
Event Codes & Messages The software
Page 12 and 13:
Event Codes & Messages (Cont.) CODE
Page 15 and 16:
Event Codes & Messages (Cont.) CODE
Page 17:
Event Codes & Messages (Cont.) 57 W
Page 20 and 21:
Low Battery Charge Messages Under m
Page 23:
Error Messages During Operation (Co
Page 26 and 27:
Status Menu Chart Use the following
Page 28 and 29:
PIO Status Use this menu to read th
Page 30:
Speaker Pitch This menu allows the
Page 34 and 35:
386 AMI BIOS Post Code Table These
Page 36 and 37:
386 AMI BIOS Post Code Table (Cont.
Page 38:
386 AMI BIOS Post Code Table (Cont.
Page 42:
Nobrk.com Error Codes (Executed by
Page 45:
Loadip.Exe (Executed By Autoexec.Ba
Page 49:
Critical Errors Code Description Po
Page 53:
ii 9600 System Service Manual © De
Page 57 and 58:
INTRODUCTION PURPOSE This manual co
Page 59 and 60:
Introduction 3 SAFETY PRECAUTIONS T
Page 61 and 62:
Introduction 5 EXPLOSION HAZARDS WA
Page 63 and 64:
Introduction 7 WARNING SYMBOLS The
Page 66 and 67:
Introduction 9 UNAUTHORIZED MODIFIC
Page 69 and 70:
SYSTEM OVERVIEW OVERVIEW This secti
Page 71:
System Overview 3 • Digital image
Page 74 and 75:
System Overview 5 • Auto and manu
Page 76:
System Overview 7 Video Monitors
Page 79 and 80:
System Overview 9 System Configurat
Page 81 and 82:
System Overview 11 NEUROVASCULAR MO
Page 84 and 85:
System Overview 13 SYSTEM OPERATION
Page 86 and 87:
System Overview 15 CAMERA ROTATION
Page 89 and 90:
System Overview 17 WORKSTATION CONT
Page 91 and 92:
System Overview 19 A V E R A G I N
Page 93 and 94:
System Overview 21 HELP PATIENT (AN
Page 95 and 96:
System Overview 23 Trackpad Panels
Page 97:
System Overview 25 Lenzar Hardcopy
Page 100:
System Overview 27 CONTROL PANEL WA
Page 103:
System Overview 29 WORKSTATION COVE
Page 107:
System Overview 31 3. Pull the left
Page 110:
System Overview 33 8. Remove the mo
Page 114 and 115:
System Overview 35 2. Grasp the top
Page 117 and 118:
System Overview 37 COMPONENT LOCATI
Page 120 and 121:
System Overview 39 Mobile C-Arm Com
Page 122 and 123:
System Overview 41 WORKSTATION COMP
Page 124 and 125:
System Overview 43 Power/Motor Rela
Page 126 and 127:
System Overview 45 IR Receiver PCB
Page 129 and 130:
POWER DISTRIBUTION OVERVIEW The inf
Page 131 and 132:
Power Distribution 3 WORKSTATION CI
Page 133 and 134:
Power Distribution 5 WORKSTATION IS
Page 135 and 136:
Power Distribution 7 POWER CONTROL
Page 137 and 138:
Power Distribution 9 F1 CB1 CB2 CB3
Page 139 and 140:
Power Distribution 11 PS4 (+24 VDC)
Page 141 and 142:
Power Distribution 13 Figure 8 DC P
Page 144:
Power Distribution 15 PS1 (5V and 1
Page 147:
Power Distribution 17 115VAC_PH_SW
Page 150 and 151:
Power Distribution 19 120 VAC DC 7
Page 153:
Power Distribution 21 S/N 69-1001 a
Page 156 and 157:
Power Distribution 23 L N 1 L D 1 G
Page 158:
Power Distribution 25 PS2 (24V) S/N
Page 161 and 162:
Power Distribution 27 Current Sensi
Page 163 and 164:
Power Distribution 29 Battery Charg
Page 165 and 166:
Power Distribution 31 S/N 69-1001 a
Page 167 and 168:
Power Distribution 33 Battery Charg
Page 169 and 170:
Power Distribution 35 BATTERY CHARG
Page 171:
2 C-Arm Control • Mainframe Mothe
Page 174 and 175:
4 C-Arm Control C-ARM WORKSTATION U
Page 177 and 178:
6 C-Arm Control CONTROL PANEL PROCE
Page 179:
8 C-Arm Control X-RAY SWITCH The si
Page 182 and 183:
10 C-Arm Control This illustration
Page 184 and 185:
12 C-Arm Control The functions of t
Page 186 and 187:
14 C-Arm Control CARD RACK ASSEMBLI
Page 188 and 189:
16 C-Arm Control TECHNIQUE PROCESSO
Page 190 and 191:
18 C-Arm Control 7-Segment Displays
Page 193:
20 C-Arm Control ANALOG INTERFACE P
Page 196 and 197:
22 C-Arm Control 9 6 2 U 1 U 1 8 R
Page 199 and 200:
24 C-Arm Control A/D SECTION The A/
Page 201:
26 C-Arm Control COUNTER/TIMER (CTC
Page 204:
28 C-Arm Control BIT # PIN # SIGNAL
Page 208 and 209:
30 C-Arm Control INTERLOCK SECTION
Page 210:
32 C-Arm Control C-ARM MOTHERBOARD
Page 213 and 214:
34 C-Arm Control 4 E 01E 1 J 1 2 1
Page 215 and 216:
36 C-Arm Control Technique Processo
Page 217 and 218:
38 C-Arm Control COMMUNICATION BETW
Page 220 and 221:
2 C-Arm Software LOADING APPLICATIO
Page 222 and 223:
4 C-Arm Software BOOT SEQUENCE Duri
Page 224 and 225:
6 C-Arm Software X-RAY CONTROL PANE
Page 226 and 227:
8 C-Arm Software A - Run Applicatio
Page 229 and 230:
10 C-Arm Software C - Run Calibrati
Page 232 and 233:
12 C-Arm Software H - Collimator Ca
Page 234 and 235:
14 C-Arm Software SRAM FILES The fo
Page 237 and 238:
16 C-Arm Software SRAM CARD COPY FI
Page 239 and 240:
18 C-Arm Software HOT-BYTE INFORMAT
Page 241 and 242:
20 C-Arm Software SRAM BATTERY REPL
Page 243 and 244:
2 Interlocks / Stator Power Signal
Page 245 and 246:
4 Interlocks / Stator FAST STOP The
Page 247:
6 Interlocks / Stator JUMPER E5/REL
Page 250 and 251:
8 Interlocks / Stator NORMAL PRE-CH
Page 253 and 254:
10 Interlocks / Stator STATOR START
Page 255 and 256:
12 Interlocks / Stator BATTERY CHAR
Page 257 and 258:
14 Interlocks / Stator POWER SUPPLY
Page 259 and 260:
X-RAY ON/DISABLE OVERVIEW This sect
Page 261:
X-ray On / Disable 3 X-RAY ENABLE S
Page 264 and 265:
X-ray On / Disable 5 X-RAY DISABLE
Page 267 and 268:
KV GENERATION OVERVIEW kV is regula
Page 269 and 270:
kV Generation 3 The return path for
Page 272 and 273:
kV Generation 5 KV ERROR CORRECTION
Page 274 and 275:
kV Generation 7 Figure 3 kV Servo C
Page 276 and 277:
kV Generation 9 KV GENERATOR FAULTS
Page 278 and 279:
kV Generation 11 NOTE If the second
Page 281:
kV Generation 13 KV ERROR CORRECTIO
Page 284 and 285:
2 mA Generation CONTROL INPUTS The
Page 286 and 287:
4 mA Generation FILAMENT REGULATOR
Page 288 and 289:
6 mA Generation MA SENSE Detects th
Page 290 and 291:
8 mA Generation MA ERROR LOOP EXAMP
Page 292 and 293:
10 mA Generation Figure 2 - mA Serv
Page 294:
12 mA Generation LOW FLUORO MA The
Page 297:
14 mA Generation MA ERROR CORRECTIO
Page 300 and 301:
2 Generator Calibration During the
Page 302 and 303:
4 Generator Calibration CALIBRATION
Page 305 and 306:
6 Generator Calibration EQUIPMENT S
Page 307 and 308:
8 Generator Calibration 11. Observi
Page 310 and 311:
10 Generator Calibration FLUORO RAD
Page 312 and 313:
12 Generator Calibration ACCESS CAL
Page 315 and 316:
14 Generator Calibration NOTE: DUTY
Page 318 and 319:
16 Generator Calibration KV/MA TECH
Page 320:
18 Generator Calibration MERGE EXIS
Page 324 and 325:
20 Generator Calibration 5R THEORY
Page 327:
22 Generator Calibration Example 3
Page 331 and 332:
24 Generator Calibration 5R ABS TAB
Page 333:
26 Generator Calibration 3. Increas
Page 336:
28 Generator Calibration NOTE: You
Page 339 and 340:
30 Generator Calibration B. mA limi
Page 341:
32 Generator Calibration 19. Withou
Page 345 and 346:
34 Generator Calibration 10R ABS TA
Page 347 and 348:
36 Generator Calibration 10R ENTRAN
Page 350:
MECHANICAL ASSEMBLIES OVERVIEW The
Page 353 and 354:
Mechanical Assemblies 3 HORIZONTAL
Page 355 and 356:
Mechanical Assemblies 5 MECHANICAL
Page 357:
Mechanical Assemblies 7 HORIZONTAL
Page 360 and 361:
Mechanical Assemblies 9 Figure 5 -
Page 362:
Mechanical Assemblies 11 FLIP FLOP
Page 365:
Mechanical Assemblies 13 C-ARM BEAR
Page 368:
Mechanical Assemblies 15 WIG WAG BR
Page 372 and 373:
Mechanical Assemblies 17 Figure 8 -
Page 374 and 375:
Mechanical Assemblies 19 REAR CASTE
Page 377 and 378:
Mechanical Assemblies 21 FRONT WHEE
Page 380 and 381:
Mechanical Assemblies 23 REAR WHEEL
Page 382:
Mechanical Assemblies 25 Older Mode
Page 385 and 386:
Mechanical Assemblies 27 Older Mode
Page 387 and 388:
Mechanical Assemblies 29 Shim Adjus
Page 389 and 390:
Mechanical Assemblies 31 L-ARM ROTA
Page 391 and 392:
Mechanical Assemblies 33 CROSS ARM
Page 393 and 394:
Mechanical Assemblies 35 Figure 16
Page 395 and 396:
Mechanical Assemblies 37 VERTICAL C
Page 397:
Mechanical Assemblies 39 3. Remove
Page 400:
2 Image System Mainframe Motherboar
Page 403 and 404:
4 Image System IMAGE FUNCTION PCB S
Page 405 and 406:
6 Image System INPUT/OUTPUT U17 and
Page 407 and 408:
8 Image System COLLIMATOR OVERVIEW
Page 409 and 410:
10 Image System IRIS MOTOR The coll
Page 411:
12 Image System LEAF IN/OUT MOTOR T
Page 414:
14 Image System LEAF ROTATION MOTOR
Page 417 and 418:
16 Image System COLLIMATOR ERROR ME
Page 419 and 420:
18 Image System IMAGE INTENSIFIER O
Page 421 and 422:
20 Image System WARNING... Image in
Page 423 and 424:
22 Image System CCD CAMERA OVERVIEW
Page 425:
24 Image System Invert Image/ Rever
Page 429 and 430:
26 Image System Input 1 Input 2 Ena
Page 432 and 433:
28 Image System Input 3 Input 4 Ena
Page 434 and 435:
30 Image System Anti-Vignetting A s
Page 437 and 438:
32 Image System PIXEL/COLUMN FILTER
Page 439:
34 Image System PIXEL FILTER PCB As
Page 442 and 443:
36 Image System CCD CAMERA REPLACEM
Page 444 and 445:
38 Image System CCD CAMERA REPLACEM
Page 446 and 447:
40 Image System VIDEO LEVEL INDICAT
Page 448 and 449:
42 Image System
Page 450 and 451:
44 Image System STATOR THERMAL CUTO
Page 452 and 453:
46 Image System REPLACEMENT OF HIGH
Page 455 and 456:
IMAGE SYSTEM CALIBRATION The proced
Page 457:
Image System Calibration 3 TOOLS Th
Page 460 and 461:
Image System Calibration 5 4. Attac
Page 463 and 464:
Image System Calibration 7 CALIBRAT
Page 465:
Image System Calibration 9 10. With
Page 468 and 469:
Image System Calibration 11 CONFIRM
Page 470 and 471:
Image System Calibration 13 ADJUST
Page 472:
Image System Calibration 15 8. Sele
Page 475 and 476:
Image System Calibration 17 Figure
Page 477:
Image System Calibration 19 4. If t
Page 480:
Image System Calibration 21 0° 270
Page 483:
Image System Calibration 23 ADJUST
Page 486 and 487:
Image System Calibration 25 COLLIMA
Page 488 and 489:
Image System Calibration 27 NOTE: I
Page 491 and 492:
Image System Calibration 29 VARIABL
Page 493 and 494:
Image System Calibration 31 9. Sele
Page 495 and 496:
Image System Calibration 33 BEAM AL
Page 497:
Image System Calibration 35 C. Swin
Page 500 and 501:
Image System Calibration 37 Adjust
Page 503 and 504:
Image System Calibration 39 PIXEL/C
Page 506 and 507:
Image System Calibration 41 ANTI-VI
Page 508 and 509:
OVERVIEW WORKSTATION CONTROL This s
Page 510 and 511:
Workstation Control 3 CONTROL PANEL
Page 512 and 513:
Workstation Control 5 CONTROL PANEL
Page 515 and 516:
Workstation Control 7 Figure 3 - Wo
Page 517 and 518:
Workstation Control 9 ELECTRONICS B
Page 520 and 521:
Workstation Control 11 AUXILIARY IN
Page 522 and 523:
Workstation Control 13 X-RAY DISABL
Page 524 and 525:
Workstation Control 15 COMMUNICATIO
Page 527:
Workstation Control 17 OPTION PROM
Page 530:
Workstation Control 19 386 AT MOTHE
Page 533 and 534:
Workstation Control 21 IR (INFRARED
Page 535 and 536:
Workstation Control 23 If the pulse
Page 538:
Workstation Control 25 IR RECEIVER
Page 541 and 542:
Workstation Control 27 Older Style
Page 544 and 545:
Workstation Control 29 INTERCONNECT
Page 546 and 547:
2 Workstation Software WORKSTATION
Page 549 and 550:
4 Workstation Software FRONT PANEL
Page 551 and 552:
6 Workstation Software TOGGLE MOTIO
Page 553 and 554:
8 Workstation Software Qwerty Keys
Page 555 and 556: 10 Workstation Software Track Pad K
Page 557 and 558: 12 Workstation Software Front Panel
Page 559 and 560: 14 Workstation Software Tone Contro
Page 561 and 562: 16 Workstation Software Watchdog Re
Page 564 and 565: Video Path 2 REFERENCE SCHEMATICS T
Page 566 and 567: Video Path 4 HIGH SCAN NON INTERLAC
Page 568 and 569: Video Path 6 WORKSTATION The video
Page 570 and 571: Video Path 8 Auxiliary Interface PC
Page 572: Video Path 10 Peripherals Analog in
Page 576 and 577: Video Path 12 HARD COPY CAMERA Vide
Page 578 and 579: Video Path 14 Auxiliary Interface P
Page 580 and 581: Video Path 16 Video Switching PCB O
Page 582 and 583: Video Path 18 Scan Converter PCB Fi
Page 584 and 585: 2 Video Control IMAGE PROCESSOR PCB
Page 587 and 588: 4 Video Control IMAGE PROCESSOR TES
Page 589 and 590: 6 Video Control VIDEO SWITCHING PCB
Page 591: 8 Video Control 50/60 HZ VIDEO CONT
Page 594 and 595: 10 Video Control FAST SCAN MONITORS
Page 596: 12 Video Control CONTRAST AND BRIGH
Page 599 and 600: 14 Video Control HIGH SCAN BRIGHTNE
Page 601 and 602: 2 Image Storage IDE HARD DISK DRIVE
Page 603 and 604: 4 Image Storage 30FPS SCSI DISK OPT
Page 605: 6 Image Storage 4/30 FPS SCSI DISK
Page 610 and 611: Image Storage DEBUGGING USING IP-SC
Page 613 and 614: 12 Image Storage Figure 5
Page 615: 14 Image Storage Figure 7 - SCSI Di
Page 618 and 619: 16 Image Storage Figure 9 - IP-SCSI
Page 621 and 622: 18 Image Storage
Page 623: 20 Image Storage J4 - NO JUMPERS TE
Page 626 and 627: 2 Peripherals Figure 1 - Rear Panel
Page 628 and 629: 4 Peripherals RECORD UNPROCESSED VI
Page 630 and 631: 6 Peripherals VCR CONNECTIONS To en
Page 632 and 633: 8 Peripherals HARD COPY CAMERA Imag
Page 635 and 636: 10 Peripherals MOUNTING INFORMATION
Page 637 and 638: 12 Peripherals DIGITAL LASER CAMERA
Page 639: 14 Peripherals 6. When CUSTOMIZE OP
Page 642 and 643: 16 Peripherals Digital Laser Camera
Page 644 and 645: 18 Peripherals After the unit has b
Page 646: 20 Peripherals 3. Then, select a sp
Page 650: 22 Peripherals 4. Move the cursor t
Page 653 and 654: 2 Appendix PAINT KITS PART NUMBER D
Page 655 and 656: 4 Appendix SPECIFICATIONS & TOLERAN
Page 658:
UPDATE 12-INCH IMAGE SYSTEM 9600 SY
Page 662 and 663:
00 Imaging Workstation Service Manu
Page 664:
9600 Imaging Workstation Service Ma
Page 667 and 668:
Page 669:
Page 672 and 673:
Page 674:
Page 677 and 678:
Page 679:
Page 683 and 684:
Page 685:
show all

GE_OEC_9600_C-Arms

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?