GE_OEC_9600_C-Arms

4 Appendix
SPECIFICATIONS & TOLERANCES
Generator Parameters
Frequency
2.5 kHz Nominal
Power
4.0 kW
Rectification
Full Wave
Modes
Normal
Boosted Fluoro
Pulsed Fluoro
kVp Accuracy ± 5% or ± 2 kVp whichever is greater
mA Accuracy ± 15% or ± 0.9 mA whichever is greater
mAs Accuracy ± 5% or 2 mAs
kVp Rise Time Less than 10 ms
kVp Overshoot Less than 5%
mA Rise Time Less than 250 mS (filament limited)
Ripple
< 1 kVp @ 5 mA
15 kVp - 20 kVp @ 100 mA
X-Ray Tube Parameters
Anode
2850 - 3450 rpm
Focal spots
0.3 mm/0.6 mm
Thermal Switch NC - opens @ 190° F
High Voltage Storage 300,000
Anode Cooling Rate 15,000 HU/min
Housing Heat 1,600,000 HU
Capacity
Anode Target 3.1"
Diameter
Anode Angle 8.5°
Weight
36 lbs.
Pulse Mode Pulse
Width
30 ms or 50 ms (Depends on Pulse Rate
Selected)
Linearity Film mode linearity < .08
Reproducibility C.O.V. < 0.04
Operating Parameters
Pulse Mode Pulse
Rate
Pulse Mode Pulse mA
kVp Range
mA Range
mAs Range
1, 2, 4, or 8 per second (selectable)
40 mA maximum
40 - 120 kVp, fluoro mode
50 - 120 kVp, film mode
0.2-5 mA normal continuous fluoro
1.0 - 12 boost mode
0.2-40 mA pulsed fluoro
75 mA film mode
1-300 mAs