HP Officejet 4500 (G510) - FTP Directory Listing - Hewlett Packard

3. Press right arrow to select Fax Confirmation, and then press OK.
4. Press right arrow to select one of the following, and then press OK.
Off Does not print a fax confirmation report when you send and receive
faxes successfully. This is the default setting.
On Fax Send Prints a fax confirmation report for every fax you send.
On Fax Receive Prints a fax confirmation report for every fax you receive.
Send & Receive Prints a fax confirmation report for every fax you send and receive.
To include an image of the fax on the report
1. Press the (Setup) button.
2. Select Print Report, and then select Fax Confirmation.
3. Select either On Fax Send or Send & Receive, and then press OK.
4. Select Image on Fax Send Report.
5. Select On, and then press OK.
Print fax error reports
You can configure the device so that it automatically prints a report when there is an error
during transmission or reception.
To set the device to print fax error reports automatically
1. Press Setup.
2. Press right arrow to select Print Report, and then press OK.
3. Press right arrow to select Fax Error , and then press OK.
4. Press right arrow to select one of the following, and then press OK.
Print and view the fax log
Send & Receive Prints whenever a fax error occurs. This is the default setting.
Off Does not print any fax error reports.
On Fax Send Prints whenever a transmission error occurs.
On Fax Receive Prints whenever a receiving error occurs.
The logs list faxes that have been sent from the device control panel and all faxes that
have been received.
You can print a log of faxes that have been received and sent by the device. Each entry
in the log contains the following information:
• Transmission date and time
• Type (whether received or sent)
• Fax number
• Duration
Use reports 57