24.12.2012 Views

HP Officejet 4500 (G510) - FTP Directory Listing - Hewlett Packard

HP Officejet 4500 (G510) - FTP Directory Listing - Hewlett Packard

HP Officejet 4500 (G510) - FTP Directory Listing - Hewlett Packard

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Media is not picked up from a tray<br />

• Make sure media is loaded in the tray. For more information, see Load media. Fan<br />

the media before loading.<br />

• Make sure the paper guides are set to the correct markings in the tray for the media<br />

size you are loading. Also make sure the guides are snug, but not tight, against the<br />

stack.<br />

• Make sure media in the tray is not curled. Uncurl paper by bending it in the opposite<br />

direction of the curl.<br />

• When using thin special media, make sure that the tray is completely loaded. If you<br />

are using special media that is only available in small quantities, try placing the special<br />

media on top of other paper of the same size to help fill the tray. (Some media is<br />

picked up more easily if the tray is full.)<br />

• If you are using thick special media (such as brochure paper), load media so that the<br />

tray is between 1/4 and 3/4 full. If necessary, place the media on top of other paper<br />

of the same size so that the stack height is within this range.<br />

Media is not coming out correctly<br />

• Make sure the output tray extension is extended; otherwise, printed pages may fall<br />

off the device.<br />

• Remove excess media from the output tray. There is a limit to the number of sheets<br />

the tray can hold.<br />

Pages are skewing<br />

• Make sure the media loaded in the trays is aligned to the paper guides. If needed,<br />

pull out the trays from the device and reload the media properly, making sure that the<br />

paper guides are properly aligned.<br />

• Load media into the device only when it is not printing.<br />

Multiple pages are being picked up<br />

• Fan the media before loading.<br />

• Make sure the paper guides are set to the correct markings in the tray for the media<br />

size you are loading. Also make sure the guides are snug, but not tight, against the<br />

stack.<br />

• Make sure the tray is not overloaded with paper.<br />

Solve paper-feed problems 93

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!