PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Laying <strong>PROFINET</strong> cables<br />
1.1 Routing <strong>PROFINET</strong> cables<br />
1.1.1 Copper cables<br />
In order to minimize pickup of electromagnetical interferences, <strong>PROFINET</strong> cables<br />
should be laid separately from other plant wiring. Parallel routing of <strong>PROFINET</strong> <strong>and</strong><br />
other cables should be minimized <strong>and</strong> the distance between these different cables<br />
should be maximized.<br />
The minimum cable bend radius <strong>and</strong> tensile strength shall be observed whilst laying<br />
<strong>PROFINET</strong> cables.<br />
During installation, additionally observe the applicable national safety<br />
<strong>and</strong> installation regulations <strong>for</strong> data <strong>and</strong> power cables. The<br />
specifications provided in this guideline are based on applicable IEC<br />
st<strong>and</strong>ards.<br />
16/99<br />
© Copyright by PNO 2009 – all rights reserved
Change language