PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Laying <strong>PROFINET</strong> cables<br />
Only use approved cables <strong>for</strong> installations outside buildings. This<br />
applies in particular to underground cables.<br />
The rules which apply <strong>for</strong> cable routing inside buildings also apply to disturbancefree<br />
routing of <strong>PROFINET</strong> cables outside buildings. In addition:<br />
• Lay the cables on metallic conductive cable trays.<br />
• Connect the joints of the cable<br />
trays using a large conductive<br />
area. Make sure that the<br />
connection is made of the same<br />
material as the cable track (no<br />
mix of materials).<br />
• Connect<br />
ground.<br />
the cable trays to<br />
24/99<br />
© Copyright by PNO 2009 – all rights reserved
Change language