PROFINET Installation Guideline for Cabling and Assembly

More documents

Recommendations

Info

Terms and definitions IP protection types by housing (IP-Code) The IP identifier according to IEC 60529 designates the protection class provided by the housings of electrical devices, e.g. IP 67. The first figure indicates the protection of persons against the intrusion of dangerous parts and protection of internal parts against the intrusion of solid foreign material. 0 – No protection 1 – Protection against solid bodies >50 mm, e.g. hands 2 – Protection against solid bodies >12 mm, e.g. fingers 3 – Protection against solid bodies >2.5 mm, e.g. tools and wires 4 – Protection against solid bodies >1 mm, e.g. tools, wires and thin wires 5 – Protection against dust (limited intrusion permitted) 6 – Protection against dust (total) The second figure indicates the protection of the internal components against the dangerous intrusion of water. 0 – No protection 1 – Protection against vertically falling water (condensate) 2 – Protection against splash water deviating from the vertical by 15° 3 – Protection against splash water deviating from the vertical by 60° 4 – Protection against splash water from all directions 5 – Protection against low pressure water jet from all directions (limited intrusion permitted) 6 – Protection against high pressure water jet from any direction (limited intrusion permitted), e.g. for use on the deck of ships 7 – Protection against water up to an immersion depth between 15 cm and 100 cm 8 – Protection against water if immersed under pressure © Copyright by PNO 2009 – all rights reserved 93/99
Terms and definitions Optical transmission ISO/IEC 8802-3 (100BASE-FX): Physical transmission with the following properties: Optical fiber made of quartz (glass) or plastics • Long distances, independent of transmission speed • Immunity to electromagnetic interference • Electrically isolated stations • Star, ring, line and mixed cable topologies • Possibility to connect to electrical network segments • Possible optical fiber types (multi-mode glass fiber, single-mode glass fiber, plastic fiber, PCF glass fiber) PROFINET Is a standard for industrial Ethernet in automation technology. It exists in two different versions or types: PROFINET CBA (Component Based Automation) for networking of distributed systems PROFINET IO (Input Output) for controlling sensors and actors using a central control system in production engineering PROFINET cable Cable for digital data transmission, designed as copper cable or optical fiber cable. PROFINET components All components of a PROFINET network (e.g. cables, connectors, controller/device interfaces, repeaters, etc.) PROFIBUS Nutzerorganisation e.V. (PNO, PROFIBUS User Organization) PNO is the regional German organization of PROFIBUS & PROFINET International (PI). PI has authorized the PROFIBUS Nutzerorganisation e.V. (PNO Germany) to install Technical Committees (TC) and Work Groups (WG) in order to define and maintain the manufacturer-independent PROFIBUS/-NET standard. The PNO has 94/99 © Copyright by PNO 2009 – all rights reserved
Page 1 and 2:
PROFINET Installation Guideline for
Page 3 and 4:
PROFINET Order No: 8.072 Identifica
Page 5 and 6:
Table of contents 1. Laying PROFINE
Page 7 and 8:
List of figures Figure 1: Cable dis
Page 9 and 10:
Safety instructions The use of the
Page 11 and 12:
Liability exclusion The PROFIBUS Us
Page 13 and 14:
Symbols This document contains vari
Page 15 and 16:
This page is intentionally left bla
Page 17 and 18:
Laying PROFINET cables 1.1 Routing
Page 19 and 20:
How to read the table Laying PROFIN
Page 21 and 22:
• Metallic conductive cable ducts
Page 23 and 24:
If the cables are laid in metallic
Page 25 and 26:
Laying PROFINET cables Only use app
Page 27 and 28:
This page is intentionally left bla
Page 29 and 30:
• In areas where people can step
Page 31 and 32:
• Store and transport the cable r
Page 33 and 34:
• Carefully unreel the PROFINET c
Page 35 and 36:
1.3.8 Distortion • Distortion, an
Page 37 and 38:
Laying PROFINET cables 1.3.11 Keepi
Page 39 and 40:
Laying PROFINET cables 1.3.13 Avoid
Page 41 and 42:
Laying PROFINET cables 1.5.1 Laying
Page 43 and 44: • If copper PROFINET cables are l
Page 45 and 46: PROFINET cable assembly work 2.1 PR
Page 47 and 48: PROFINET cable assembly work Note t
Page 49 and 50: Manuf. instructions PROFINET cable
Page 51 and 52: • Push down the retainer. • Clo
Page 53 and 54: • Open the connector. • Slide t
Page 55 and 56: PROFINET cable assembly work 2.1.5
Page 57 and 58: • Push the two parts of the conne
Page 59 and 60: Manuf. instructions PROFINET cable
Page 63 and 64: PROFINET cable assembly work The ne
Page 65 and 66: PROFINET cable assembly work For mu
Page 67 and 68: • Strip the FO cable sheath. •
Page 69 and 70: Guideline for further details • P
Page 71 and 72: • Strip the external jacket and t
Page 73 and 74: Optical measurement PROFINET cable
Page 75 and 76: PROFINET cable assembly work As pro
Page 77 and 78: • Interconnect all shields and gr
Page 79 and 80: • Connect the metal cable trays t
Page 83 and 84: • Do not use the shield connectio
Page 85 and 86: This page is intenionally left blan
Page 87 and 88: Connecting PROFINET nodes 3.1.1 Ele
Page 89 and 90: • Due to its design, it is normal
Page 91 and 92: This page is intentionally left bla
Page 93: Glossary Terms and definitions Comm
Page 97 and 98: Alphabetic index 96/99 © Copyright
Page 99 and 100: 98/99 © Copyright by PNO 2009 - al
Page 101: Order No.: 8.072 01/2009 © Copyrig
show all

PROFINET Installation Guideline for Cabling and Assembly

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?