PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>PROFINET</strong> cable assembly work<br />
2.3.7 Establishing a connection between the cable<br />
shield <strong>and</strong> the equipotential bonding bar<br />
There are several ways <strong>for</strong> connecting the cable shield <strong>and</strong> the equipotential<br />
bonding conductor over a large area. The figure below illustrates three connection<br />
options. These approaches have proven to be successful in daily operation.<br />
Figure 11: Possible connections between shield <strong>and</strong> potential equipotential bonding bar<br />
Make sure that the <strong>PROFINET</strong> cable is not squashed by the<br />
connection between the shield <strong>and</strong> the equipotential bonding bar. Use<br />
a shield clamp that is appropriate <strong>for</strong> the cable diameter. Any distortion<br />
can deteriorate the electrical properties of the <strong>PROFINET</strong> cable.<br />
80/99<br />
© Copyright by PNO 2009 – all rights reserved
Change language