PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• Cut off the fiber, sticking out of the<br />
ferrule. In case of a glass fiber, use<br />
special cleave tool.<br />
• Polish optical fiber cable in minimal<br />
two steps (rough <strong>and</strong> then fine<br />
polish) according the termination<br />
instruction. Use a polishing holder<br />
to align the connector to the<br />
polishing pad <strong>and</strong> polish it with<br />
movements in a shape 8.<br />
• Remove all traces of abrasive<br />
material.<br />
• Check the quality of the optical<br />
surface with a portable Inspection<br />
microscope. Make sure that the<br />
surface is free of dirt, debris or<br />
damage.<br />
• Check the correct mounting of the<br />
connector by measuring the<br />
attenuation of the cable with the<br />
assembled connectors. (Se<br />
<strong>PROFINET</strong> Commissioning<br />
<strong>PROFINET</strong> cable assembly work<br />
© Copyright by PNO 2009 – all rights reserved<br />
Good Surface<br />
67/99
Change language