PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>PROFINET</strong> cable assembly work<br />
2.1.3 M12 connector assembly<br />
The 4-pin M 12 connector is also an important type of connector <strong>for</strong> <strong>PROFINET</strong>. It is<br />
frequently used in rugged industrial environments outside the switching cabinet.<br />
The connection technology varies depending on the manufacturer. The next section<br />
will focus on field assembly connectors <strong>for</strong> <strong>PROFINET</strong>. The following connection<br />
technologies are available <strong>for</strong> field-assembly <strong>PROFINET</strong> cables:<br />
• Screwed clamp technology<br />
• Insulation displacement technology<br />
2.1.4 M12 screwing clamp technology<br />
Manuf.<br />
instructions<br />
The general steps are:<br />
Manufacturer instructions:<br />
Read the instructions from the connector manufacturer. The<br />
instructions provide valuable in<strong>for</strong>mation of the connector design. The<br />
following description reflects the basic procedure, but by no means<br />
does it replace the manufacturer's instructions.<br />
Notice:<br />
M12 connectors usually consist of several parts. The IP protection type<br />
may vary depending on the connector type. After opening the package,<br />
check whether all parts are included.<br />
© Copyright by PNO 2009 – all rights reserved<br />
51/99
Change language