PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>PROFINET</strong> cable assembly work<br />
2.1 <strong>PROFINET</strong> copper cable assembly work<br />
There are several types of connectors to connect <strong>PROFINET</strong> copper cables to a<br />
<strong>PROFINET</strong> node: The 8-pin RJ45 <strong>and</strong> the M12 connector.<br />
.<br />
1 8 8 1<br />
RJ45, multipin,<br />
RJ45, multipin,<br />
male<br />
female<br />
M12,multipin,<br />
male<br />
2 2<br />
3 1 1<br />
3<br />
Figure 3: Pin-assignment of RJ45 <strong>and</strong> M12 connectors<br />
For an IP20 environment in a cabinet the RJ45 connector is used. In case of<br />
increased requirements with respect to the ingress protection (IP65/67) the RJ45connector<br />
with a push pull housing or an M12 connector (D-coding) is used.<br />
44/99<br />
© Copyright by PNO 2009 – all rights reserved<br />
4<br />
4<br />
M12, multipin,<br />
female