PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
• Push the two parts of the connector<br />
together<br />
• Ensure that the cable strain relief<br />
<strong>and</strong> cable seal are correctly fitted.<br />
• Close <strong>and</strong> tighten the connector,<br />
making sure that the wires inside<br />
the connector are not twisted as the<br />
screwed housing is assembled.<br />
<strong>PROFINET</strong> cable assembly work<br />
For insulation displacement technology there are appropriate stripping tools <strong>for</strong> each<br />
manufacturer's system. These tools not only strip off the insulation, but also expose<br />
the shield. They considerably facilitate the assembly <strong>and</strong> reduce the assembly time.<br />
Notice:<br />
The stripping tools <strong>for</strong> different cable types are in some cases identical<br />
in appearance. However, there are often differences in the knife<br />
cartridge that is installed in the stripping tool. The knife cartridge must<br />
be suited to the <strong>PROFINET</strong> cable/connector that is being used. Using<br />
the incorrect cartridge can result in defective connection of the data<br />
wires or screen.<br />
56/99<br />
© Copyright by PNO 2009 – all rights reserved
Change language