PROFINET Installation Guideline for Cabling and Assembly

• Due to its design, it is
normally impossible to turn
a plug connection out of
position. However, before
joining the components
nevertheless check how
the socket and connector fit
together. You can thus
avoid damage to the
connectors. This is of
special importance when
using round connectors,
e.g. M12.
•
• Only touch the housing of
plug connections.
• If cables are directly
connected, touch the
insulation, not the wires.
Connecting PROFINET nodes
88/99
© Copyright by PNO 2009 – all rights reserved
2 2
3 1 1
3
4
4