PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.1.6 Hybrid connectors<br />
Figure 6: Hybrid connectors<br />
<strong>PROFINET</strong> cable assembly work<br />
Hybrid connectors use the same connector <strong>for</strong> the power supply of the <strong>PROFINET</strong><br />
nodes <strong>and</strong> <strong>for</strong> the connection of the <strong>PROFINET</strong> cable. This reduces the installation<br />
work. <strong>Installation</strong> can be simplified significantly by using ready-made cables that are<br />
available from the cable manufacturers in various lengths. Where connectors have<br />
to be assembled on site due to deviating cable lengths or repair work, the<br />
manufacturer’s instructions shall be observed. The contacts of hybrid connectors<br />
are usually crimped. Crimping tools are provided by the connector manufacturers.<br />
Use only crimping tools specified by the manufacturer of the connector. Correctly<br />
crimped connections are m<strong>and</strong>atory <strong>for</strong> a permanent, high-quality connection.<br />
© Copyright by PNO 2009 – all rights reserved<br />
57/99
Change language