PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
PROFINET Installation Guideline for Cabling and Assembly
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>PROFINET</strong> cable assembly work<br />
The following commercial cable types are used <strong>for</strong> industrial applications (Table 8<br />
<strong>and</strong> Table 9):<br />
Plastic Optical Fibre (POF) or Plastic Cladded Fiber (PCF)<br />
<strong>Installation</strong> type stationary or flexible highly flexible<br />
Cable marking type B + fiber type type B + fiber type<br />
Sheath color green application-specific<br />
Wire color orange + black orange + black<br />
Maximum attenuation at<br />
650 nm<br />
10 dB/km<br />
Plastic<br />
(POF)<br />
Optical Fiber 160 dB/km<br />
Plastic<br />
(PCF)<br />
Cladded Fiber 10 dB/km<br />
Table 8: Plastic fiber optic cable<br />
Single Mode(SM) or Multi Mode(MM)<br />
<strong>Installation</strong> type stationary or flexible highly flexible<br />
Cable marking type B + fiber type type B + fiber type<br />
Sheath color green application-specific<br />
Wire color orange + black orange + black<br />
Maximum attenuation at MM: 1.5 dB/km<br />
1300 nm<br />
(IEC 60793-1-40/41)<br />
SM: 0,6 dB/km<br />
Table 9: Glass fiber optic cable<br />
Manuf.<br />
instructions<br />
Manufacturer instructions:<br />
The selection of a suitable connector (SC-RJ or SC-RJ-Push-Pull or<br />
M12 Hybrid Connector) depends on the device to be connected, on the<br />
requirements concerning dust <strong>and</strong> water protection (IP protection type)<br />
<strong>and</strong> on the cable used.<br />
© Copyright by PNO 2009 – all rights reserved<br />
63/99
Change language