KR QUANTEC extra - KUKA Robotics

More documents

Recommendations

Info

KR QUANTEC extra 108 / 127 Issued: 29.11.2012 Version: Spez KR QUANTEC extra V4 en (PDF)
7 Transportation 7.1 Transporting the robot Transport position Transport dimensions Issued: 29.11.2012 Version: Spez KR QUANTEC extra V4 en (PDF) 7 Transportation Before transporting the robot, always move the robot into its transport position. It must be ensured that the robot is stable while it is being transported. The robot must remain in its transport position until it has been fastened in position. Before the robot is lifted, it must be ensured that it is free from obstructions. Remove all transport safeguards, such as nails and screws, in advance. First remove any rust or glue on contact surfaces. The robot must be in the transport position before it can be transported. The robot is in the transport position when the axes are in the following positions: Axis A1 A2 A3 A4 A5 A6 Transport position 0° -140° +150° 0º -120º 0º Fig. 7-1: Transport position The transport dimensions (>>> Fig. 7-2 ) for the robot can be noted from the following diagram. The position of the center of gravity and the weight vary according to the specific configuration and the position of axes 2 and 3. The specified dimensions refer to the robot without equipment. Fig. 7-2: Transport dimensions 1 Center of gravity 2 Fork slots Transport dimensions and centers of gravity 109 / 127
Page 1 and 2:
Robots KR QUANTEC extra With F and
Page 3 and 4:
Contents Issued: 29.11.2012 Version
Page 5 and 6:
Issued: 29.11.2012 Version: Spez KR
Page 7 and 8:
1 Introduction 1.1 Industrial robot
Page 9 and 10:
2 Purpose 2.1 Target group 2.2 Inte
Page 11 and 12:
3 Product description 3.1 Overview
Page 13 and 14:
Issued: 29.11.2012 Version: Spez KR
Page 15 and 16:
4 Technical data 4.1 Basic data Bas
Page 17 and 18:
4.2 Axis data Axis data, KR 210 R27
Page 19 and 20:
Fig. 4-1: Working envelope, KR 210
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
4.3 Payloads Fig. 4-9: Working enve
Page 29 and 30:
Payloads, KR 90 R2900 extra Load ce
Page 31 and 32:
Fig. 4-11: Payload diagram Issued:
Page 33 and 34:
Fig. 4-13: Payload diagram Issued:
Page 35 and 36:
Mounting flange, adapter (optional)
Page 37 and 38:
4.5 Transport dimensions Issued: 29
Page 39 and 40:
Fig. 4-20: Plates and labels Issued
Page 41 and 42:
Fig. 4-21: Extension 4.7.3 Stopping
Page 43 and 44:
Fig. 4-23: Stopping times for STOP
Page 45 and 46:
Page 47 and 48:
4.7.4.2 Stopping distances and stop
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58: 4.7.6.2 Stopping distances and stop
Page 63 and 64: Fig. 4-47: Stopping times for STOP
Page 77 and 78: 4.7.10.2 Stopping distances and sto
Page 87 and 88: 5 Safety 5.1 General 5.1.1 Liabilit
Page 89 and 90: 5.1.4 Terms used Issued: 29.11.2012
Page 91 and 92: Tasks Operator Programmer Switch ro
Page 93 and 94: Issued: 29.11.2012 Version: Spez KR
Page 95 and 96: 5.5 Safety measures 5.5.1 General s
Page 101 and 102: Name Definition Edition EN 614-1 Sa
Page 103 and 104: 6 Planning 6.1 Mounting base with c
Page 105 and 106: 6.2 Machine frame mounting Issued:
Page 107: Interface for energy supply systems
Page 111 and 112: Fig. 7-4: Transportation using lift
Page 113 and 114: 8 Options 8.1 Mounting flange, adap
Page 115 and 116: 9 KUKA Service 9.1 Requesting suppo
Page 117 and 118: France KUKA Automatisme + Robotique
Page 119 and 120: Poland KUKA Roboter Austria GmbH Sp
Page 121 and 122: Hungary KUKA Robotics Hungaria Kft.
Page 123 and 124: Index Numbers 2004/108/EC 100 2006/
Page 125 and 126: Working range limitation 92 Working
Page 127: Issued: 29.11.2012 Version: Spez KR
show all

KR QUANTEC extra - KUKA Robotics

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?