Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Changing Design Requests (DTCHGDR)<br />
The Change Design Request command (DTCHGDR) is used to change existing<br />
information for a design request. For example, this command can be used to change<br />
the current status of a design request, the development resources initials, or the<br />
estimated completion date for a request.<br />
Change Design Request (DTCHGDR) Panel 1 of 3<br />
Change Design Request (DTCHGDR) Command<br />
Change Design Request (DTCHGDR) Command<br />
Parameters, Panel 1 of 3<br />
Drnumber<br />
Specify the number of the design request to be changed. The maximum is five<br />
alphanumeric characters.<br />
Title<br />
Design request title. The maximum is 30 alphanumeric characters. Set this value to<br />
*SAME to use the existing field value for the design request.<br />
Type<br />
The design request type code. The maximum is two alphanumeric characters. Set to<br />
*SAME to use the existing field value for the design request.<br />
System<br />
Name of the system the design request is for. The maximum is eight alphanumeric<br />
characters. Set to *SAME to use the existing field value for the design request.<br />
Product<br />
The product associated with the design request. The maximum is 10 alphanumeric<br />
characters. Set to *SAME to use the existing field value for the design request.<br />
CHAPTER 6 <strong>SDM</strong>-DESIGNTRACKER COMMAND INTERFACE • 111