SDM-DesignTracker 5.0 User Guide - MKS

More documents

Recommendations

Info

From the MKS Software Development Management Library Manual SDM-DesignTracker 5.0 User Guide Document ID DTU5.0991015 Software SDM-DesignTracker 5.0 Notice The information in this manual is subject to change without notice. Mortice Kern Systems International SRL, its parent company and affiliates (MKS) make no warranty of any kind with regard to this material, including, but not limited to the implied warranties of merchant ability, performance, or fitness for a particular purpose. MKS shall not be liable for errors contained herein, or for any direct, incidental, or consequential damages resulting from the use of this material. Copyright 1999, Mortice Kern Systems International SRL. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means, without written permission from Mortice Kern Systems International SRL. Printed in the Canada, October, 1999. All MKS products are trademarks or registered trademarks of one of the MKS group of companies. Other brand and product names are trademarks or registered trademarks of their respective holders. Corporate Headquarters Mortice Kern Systems Inc. 185 Columbia St. W. Waterloo, Ontario Canada N2L 5Z5 Tel: +1 519 884 2251 Fax: +1 519 884 8861 North American Sales: 1 800 265 2797 E-mail: info@mks.com MKS/DataFocus 12450 Fair Lakes Circle Suite 400 Fairfax, Virginia 22033 U.S.A. Tel: +1 703 803 3343 Fax: +1 703 803 3344 E-mail: nutcracker@mks.com MKS France 11C Quai Conti 78430 Louveciennes France Tel: +331 3082 2762 Fax: +331 3082 7278 E-mail: france@mks.com Mortice Kern Systems US Inc. 2500 S. Highland Av. Suite 200 Lombard, Illinois 60148 U.S.A Tel: +1 630 495-2108 Fax: +1 630 495-3591 E-mail: sdminfo@mks.com MKS (UK) Ltd Third Floor, Duke’s Court Duke Street, Woking Surrey GU21 5BH United Kingdom Tel: +44 1483 733 900 Fax: +44 1483 733 901 E-mail: uk@mks.com Mortice Kern Systems US Inc. 9020-I Capital of Texas Highway North Great Hills Corporate Center Suite 335 Austin, Texas 78759 U.S.A. Tel: +1 512 342-2220 Fax: +1 512 342-2939 E-mail: austin@mks.com MKS Germany Martinstraße 42-44 D-73728 Esslingen Deutschland Tel: +49 711 351775 0 Fax: +49 711 351775 11 E-mail: info@mks.de MKS Japan Kounike Building 4F 2-5-7 Minamisuna Koto-Ku, Tokyo Japan E-mail: japan@mks.com Please visit our web site at http://www.mks.com/ for up-to-date postal and telephone information.
Contents CHAPTER 1 BEFORE YOU BEGIN 1 Who Should Read This Book.....................................................................................................1 What to Know Before Using This Product.................................................................................1 Document Conventions ..............................................................................................................2 Installation Requirements...........................................................................................................2 MKS Product Support................................................................................................................3 Telephone ....................................................................................................................3 MKS Online.................................................................................................................3 Facsimile......................................................................................................................3 How Does Product Support Work?..............................................................................4 CHAPTER 2 GETTING STARTED 7 What is SDM-DesignTracker? ...................................................................................................7 What’s Inside .............................................................................................................................8 Starting SDM-DesignTracker.....................................................................................................9 What’s on the SDM-DesignTracker Main Menu .......................................................................9 What’s New in This Release ....................................................................................................11 New Options on the Main Menu................................................................................11 New Options on the Setup Menu ...............................................................................13 Work With Products Enhancements ..........................................................................14 Integrated File System (IFS) Management Enhancements.........................................17 CHAPTER 3 SETUP TASKS 19 Overview..................................................................................................................................19 Working With Service Request and Design Request Type Codes ...........................................21 Working With Service Request and Design Request Status Codes..........................................22 Working With Priority Codes...................................................................................................23 Working With Project Creation Rules......................................................................................25 Working With Systems.............................................................................................................26 Working With Environment Status Code Settings ...................................................................28 Working With Companies, Divisions, and Departments..........................................................29 Working With Cost Centers .....................................................................................................32 Working With Products and Components................................................................................34 Working With Components .......................................................................................37 Working With Product Versions ..............................................................................................39 Working with Releases ..............................................................................................42 Working With From Environments............................................................................45 Working With Approval Users ..................................................................................48 Working With Users.................................................................................................................49 Work With Users Task Variations .............................................................................51 CONTENTS • I
Page 1: SDM-DesignTracker 5.0 User Guide
Page 5 and 6: CHAPTER 6 SDM-DESIGNTRACKER COMMAND
Page 7 and 8: CHAPTER 1 BEFORE YOU BEGIN Who Shou
Page 9 and 10: MKS Product Support When you have q
Page 11 and 12: What to Expect MKS Product Support
Page 13 and 14: CHAPTER 2 GETTING STARTED What is S
Page 15 and 16: Starting SDM-DesignTracker To start
Page 17 and 18: What’s New in This Release The us
Page 19 and 20: New Options on the Setup Menu The n
Page 21 and 22: 10, Work With Versions The version
Page 23 and 24: Integrated File System (IFS) Manage
Page 25 and 26: CHAPTER 3 SETUP TASKS Overview This
Page 27 and 28: Working With Service Request and De
Page 29 and 30: Note: Changing the Closed status fr
Page 31 and 32: Working With Project Creation Rules
Page 33 and 34: 3. If creating a new system, type 1
Page 35 and 36: Working With Companies, Divisions,
Page 37 and 38: To establish divisions and departme
Page 39 and 40: Working With Cost Centers Task Vari
Page 41 and 42: Work With Products Panel Options Th
Page 43 and 44: Default Source Indicate whether sou
Page 45 and 46: Working With Product Versions A ver
Page 47 and 48: Product Version Maintenance Field D
Page 49 and 50: To work with releases: 1. From Work
Page 51 and 52: Working With From Environments The
Page 53 and 54:
Product Version Environment Mainten
Page 55 and 56:
Working With Users This option allo
Page 57 and 58:
Work With Users Task Variations If
Page 59 and 60:
Working With Resources This option
Page 61 and 62:
3. Type 8 in the Opt field to displ
Page 63 and 64:
Release Setup Options The Release S
Page 65 and 66:
Working With Media Types Media defi
Page 67 and 68:
Working With Countries Country code
Page 69 and 70:
Working With Customer Types Custome
Page 71 and 72:
CHAPTER 4 WORKING WITH SERVICE REQU
Page 73 and 74:
Subset Service Requests Task Variat
Page 75 and 76:
6. You can set the initial values f
Page 77 and 78:
Depending on your subset authoritie
Page 79 and 80:
Subsetting Design Requests 4. Attac
Page 81 and 82:
Creating a Design Request This task
Page 83 and 84:
Create Design Request Task Variatio
Page 85 and 86:
Attaching SDM-SupportCenter Calls t
Page 87 and 88:
CHAPTER 5 SDM-IMPLEMENTER INTERFACE
Page 89 and 90:
5. On the Check Out main panel, pre
Page 91 and 92:
SDM-DesignTracker to SDM-Implemente
Page 93 and 94:
To select objects: 1. Type option 1
Page 95 and 96:
Working With Entities - Ready for C
Page 97 and 98:
Working With Design Request Entitie
Page 99 and 100:
Release Control Development Scenari
Page 101 and 102:
Working With Products and Versions
Page 103 and 104:
To create release types: 1. From th
Page 105 and 106:
Working With the Release Status The
Page 107 and 108:
To work with the release status: 1.
Page 109 and 110:
Release Status Specify the status a
Page 111 and 112:
CHAPTER 6 SDM-DESIGNTRACKER COMMAND
Page 113 and 114:
System Name of the computer system
Page 115 and 116:
Dept The department of the division
Page 117 and 118:
Changing Design Requests (DTCHGDR)
Page 119 and 120:
Estcost Additional area to store co
Page 121 and 122:
Userdef2 User-defined field value f
Page 123 and 124:
Approve Design Request (DTAPRDR) Co
Page 125 and 126:
CHAPTER 7 UTILITIES Overview This c
Page 127 and 128:
Printing the Design Request Standar
Page 129 and 130:
Printing the Service Request Summar
Page 131 and 132:
subset option, or press ENTER again
Page 133 and 134:
c) Enter the value you want to sear
Page 135 and 136:
APPENDIX A GLOSSARY OF TERMS admini
Page 137 and 138:
domain This is an SDM-ProjectMaster
Page 139 and 140:
elease type User-defined variable t
Page 141 and 142:
INDEX A Abstract/Probe building the
Page 143 and 144:
N Narrative, defined 131 O Object s
show all

SDM-DesignTracker 5.0 User Guide - MKS

Create successful ePaper yourself

Delete template?

Save as template?