Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
86 • <strong>SDM</strong>-DESIGNTRACKER <strong>5.0</strong> USER GUIDE<br />
Using Hawkeye/Pathfinder for Entity Selection<br />
You can also use Hawkeye’s PathFinder to select objects for the entity list. Two steps<br />
are necessary to use this function:<br />
1. Build a cross-reference listing of the appropriate libraries.<br />
2. Use F18=X-ref to perform the selection from within PathFinder.<br />
Building the Hawkeye Library<br />
It is necessary to build a view of the Hawkeye library for the cross-reference<br />
information to be available for selection. The following is a summary of this task. For<br />
a complete description, see the PathFinder manual.<br />
To select objects for the entity list using<br />
Hawkeye’s PathFinder:<br />
1. Access Hawkeye from the command line, or from the Work with Entity<br />
List panel, press F18=PathFinder.<br />
2. In the Hawkeye Overview menu (HAWKOVER) select option 53 to<br />
display the Hawkeye Setup menu (HAWKSETUP).<br />
3. Select option 1 to set up your library defaults in the DOCLIBL <strong>User</strong><br />
Values panel.<br />
4. Type the names of your from environment libraries and press ENTER.<br />
A message displays stating “Without making changes,<br />
press ENTER to confirm”.<br />
5. Press ENTER again to redisplay the Hawkeye Setup menu.<br />
6. Type option 5 to display the <strong>User</strong> Defaults panel. In the Object X-Ref<br />
library field, type the name of the library where you want to store the<br />
cross-reference information. (You will type this library again when you<br />
execute the build for the cross-reference list.)<br />
7. Press ENTER.<br />
8. Press F3=Exit to redisplay the Hawkeye main menu.<br />
9. Select option 54, Object X-Ref, to display the Object X-Ref panel.<br />
10. Select option 1 to build the cross-references list.<br />
11. Press ENTER to display the Build/Refresh Object X-Ref panel.<br />
12. Type option 1 next to the libraries you inserted in DOCLIBL <strong>User</strong><br />
Values panel and press ENTER to perform the build.<br />
13. Type *DOCLIBL and press ENTER.<br />
14. Type the name of the library you defined in step 6, to store the crossreference<br />
information, and press ENTER.<br />
15. Press ENTER again, with the defaults on the Submit panel.
Change language