You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
36 • <strong>SDM</strong>-<strong>DesignTracker</strong> <strong>5.0</strong> <strong>User</strong> <strong>Guide</strong><br />
To create a product definition:<br />
1. From the <strong>SDM</strong>-<strong>DesignTracker</strong> Setup menu, select option 23, Products,<br />
and press ENTER. The Work with Products panel displays.<br />
2. Type 1=Create on the first option line and press ENTER. The Product<br />
Maintenance window displays.<br />
Product Maintenance Window<br />
3. Complete this panel as defined next in “Product Maintenance Field<br />
Descriptions”.<br />
4. When finished, press ENTER.<br />
Product Maintenance Field Descriptions<br />
Product<br />
Identify the product. This is a 10 character user-defined field. Input is required.<br />
Description<br />
Enter a description for the product. This is a 30 character field. Input is required.<br />
Manager<br />
Identify the product manager, if applicable.<br />
Load Sequence<br />
The load sequence controls the order that products are loaded on the tape, and the<br />
order in which they are installed from the tape on the customer system. For packages<br />
that contain multiple products, this determines the order that this product is installed<br />
in relation to the other products in the shipment. For example, if an Order Entry (OE)<br />
application requires that a General Ledger (GL) application be on the system prior to<br />
an install, GL would have a lower load sequence than OE. This is a five character<br />
numeric field. Input is optional.
Change language