Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Bulletin Board<br />
78 • <strong>SDM</strong>-DESIGNTRACKER <strong>5.0</strong> USER GUIDE<br />
This task displays a bulletin board that allows you to enter or respond to questions<br />
from <strong>SDM</strong>-SupportCenter personnel about the selected design request. This is<br />
particularly helpful when a call is attached to a design request to aid communication<br />
of information to the support personnel.<br />
This is an optional task typically performed by a project leader or programmer<br />
whenever a question arises or information needs to be updated.<br />
<strong>SDM</strong>-SupportCenter needs to be installed for this functionality.<br />
To use the bulletin board:<br />
1. From the <strong>SDM</strong>-<strong>DesignTracker</strong> Menu, type option 1 and press ENTER<br />
to display the Work with Design Requests panel, or type Work with<br />
Bulletin Board command DTWRKDR at the command line.<br />
2. On the Work with Design Requests panel, type 13 in the Opt field to<br />
display the Bulletin Board panel.<br />
3. Type in the necessary comments and press ENTER.<br />
This panel allows input of narrative information about or for a specific<br />
design request (maximum 999 lines of input). This multiple line entry<br />
text provides a place for <strong>SDM</strong>-SupportCenter personnel who have the<br />
correct authority to add (but not update) text associated with the design<br />
request. You must have update authority to maintain the text.<br />
Lines can be inserted or rearranged by selecting F8 and typing over the<br />
sequence numbers. If a + displays in the bottom right corner of the<br />
panel, additional text lines are available for viewing. Use the Roll keys<br />
to display additional lines of text.
Change language