Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Working With Entities - Adding Related Entities<br />
88 • <strong>SDM</strong>-DESIGNTRACKER <strong>5.0</strong> USER GUIDE<br />
This function allows you to select all objects or individual objects related to a single<br />
entity to include on the Check Out selection panel. This information is retrieved from<br />
either <strong>SDM</strong>-Implementer, or from PathFinder (using API calls) depending on what<br />
source of related object information is specified for the ‘From’ environment.<br />
Adding related objects to a request insures that an object is not promoted that would<br />
cause a level check in this environment.<br />
This is an optional function typically performed by a project leader or programmer<br />
when adding entities to the design request, either at initial creation or when changing<br />
the design request at a later time.<br />
If you are using <strong>SDM</strong>-Implementer this option can be specified only for an object of<br />
type *FILE. Programs are also available when using PathFinder. To determine the<br />
source of the related object information, set the required flag in the <strong>SDM</strong>-<br />
Implementer Work with Environments option.<br />
To work with environments and add related<br />
entities:<br />
This task assumes you are in the Work with Design Requests panel and the design<br />
request you want to work with exists.<br />
1. Select option 12 on Work with Design Request Panel to display the<br />
Work with Entity List Member panel.<br />
2. To add related objects, type 7=Add related, in the Opt field on the<br />
Work with Entity list panel, and press ENTER to display the Select<br />
Related Objects panel. All of the objects are pre-selected with 1.<br />
3. Press ENTER to accept. The Select Related Objects panel displays.<br />
4. Press ENTER again to confirm the objects and redisplay the Select<br />
Related Objects panel.<br />
5. Press ENTER again to redisplay the Work with Entity list panel.<br />
6. Press F3=Exit to redisplay the main menu.<br />
Add Related Entities Task Variations<br />
This task variation is carried out the same way, except that you must specifically<br />
select the objects from the Select Related Objects panel.<br />
1. Select option 12 on Work with Design Request Panel to display the<br />
Work with Entity List Member panel.<br />
2. To add related objects, type 6=Dsp related, in the Opt field on the<br />
Work with Entity list panel and press ENTER. The Select Related<br />
Objects panel displays.<br />
3. Select the objects by typing 1 in the option field, and press ENTER<br />
once to accept. The Select Related Objects panel displays.<br />
4. Press ENTER again to confirm the objects and redisplay the Select<br />
Related Objects panel.<br />
5. Press ENTER again to redisplay the Work with Entity list panel.<br />
6. Press F3=Exit to redisplay the main menu.