You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
84 • <strong>SDM</strong>-DESIGNTRACKER <strong>5.0</strong> USER GUIDE<br />
To work with entities and create an entity list:<br />
This task assumes you are in the Work with Design Requests panel and the design<br />
request you want to work with exists.<br />
1. From the Work with Design Request panel, type option 12 to display<br />
the Work with Entity List Member panel.<br />
2. Type 1 in the Opt field on the Work with Entity list panel and press<br />
ENTER.<br />
3. In the Create Entity List Member, complete the following required<br />
fields:<br />
a) Entity<br />
b) Object code<br />
c) Action<br />
d) If you have <strong>SDM</strong>-Implementer and <strong>SDM</strong>-ProjectMaster installed,<br />
complete the Suffix for the PM function and <strong>SDM</strong>-Implementer<br />
project fields. Also, if you know the developer, or it differs from<br />
the resource defined on the design request, complete the<br />
development resource.<br />
4. Press ENTER to add the record.<br />
Note: At creation, the disposition of 0=Not ready is the default⎯you do not<br />
have to set the disposition. Before the disposition can be set to 1=Ready for<br />
check out, it must be approved. The following dispositions are set by <strong>SDM</strong>-<br />
Implementer: 2=In development, 3=In quality assurance, and 4=Completed.<br />
5. Specify the appropriate development text.<br />
6. Press ENTER to add the record.<br />
7. Press ENTER again to redisplay the Work with Entity list panel.