Modeles 4370 UR1800 Recorder Instruction Manual
Modeles 4370 UR1800 Recorder Instruction Manual
Modeles 4370 UR1800 Recorder Instruction Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
IM 4H3B1-01E<br />
8 Place the rear chart guide plate back into position. Press the rear chart guide plate down<br />
and towards you and load the chart.<br />
9 Place the front transparent chart guides back into position (see figure 5.5).<br />
Figure 5.5<br />
10 Replace the chart paper compartment back into the unit. Slide the protruding knurls of<br />
the chart paper compartment into the cutout grooves located on the support brackets.<br />
Push/swing the compartment into the unit until the lock tab clicks shut (see figure 5.6).<br />
Figure 5.6<br />
5.2 How to Install (& Replace) Chart, Pens, Ribbon Cassette and Battery<br />
11 Press the FEED-key (when the power is ON) until 2 leaves of paper are fed (or until the<br />
chart is not curled anymore) and confirm that the chart is fed continuously. If not, repeat<br />
the procedure from step 4.<br />
NOTE A red band is printed at the end of the chart with the heading ‘RENEW CHART’ to<br />
notify you when it is time to prepare a new chart.<br />
5 - 3<br />
5. DAILY OPERATION
Change language