Modeles 4370 UR1800 Recorder Instruction Manual
Modeles 4370 UR1800 Recorder Instruction Manual
Modeles 4370 UR1800 Recorder Instruction Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5.3.5 How to Get a SET UP List Printout<br />
A SET UP list printout contains:<br />
• initial settings; analog recording<br />
• initial settings; digital printing<br />
• initial settings; alarms<br />
• initial settings; burnout, RJC and others<br />
• initial settings; options, if installed.<br />
To get the SET UP list printout, proceed as follows:<br />
Press the MENU-key and select the ‘MENU=SELECT_FUNCTION’ display using the<br />
UP/DOWN- keys. Then press the ENT-key. Select the ‘PRINT_SETUP_LIST’<br />
display using the UP/DOWN-keys. Press the ENT-key, and the printing will start.<br />
When the writing of this printout starts, the display will return to the previous one.<br />
When the writing of this printout is finished, this SET UP list printout function is<br />
cancelled automatically and the µR1800 returns to the recording previously in progress.<br />
When you want to cancel this SET UP list printout function while in progress, press the<br />
MENU-key again, select the ‘MENU=SELECT_FUNCTION’ display and press the<br />
ENT-key. Then the ‘STOP_SETUP_LIST’ display will appear and press the ENTkey.<br />
The µR1800 returns to the recording previously in progress.<br />
During the writing of the SET UP list printout, the analog recording will stop.<br />
However, scanning of the input and detection of alarms will still continue. When alarms<br />
occur during this printout, the printing of these alarms will be done after the analog<br />
recording (re)starts.<br />
Figure 5.12a SET UP List Printout Example in case of Pen Model<br />
5 - 10 IM 4H3B1-01E