Modeles 4370 UR1800 Recorder Instruction Manual
Modeles 4370 UR1800 Recorder Instruction Manual
Modeles 4370 UR1800 Recorder Instruction Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6.3 Flow Charts<br />
IM 4H3B1-01E<br />
6.3 Flow Charts<br />
MENUS<br />
In the paragraphs where the setting procedures are explained, you will find menus, like<br />
for example (as in chapters 7 and 8):<br />
RANGE<br />
ALARM<br />
UNIT<br />
CHART<br />
CLOCK<br />
COPY<br />
AUX<br />
01<br />
02<br />
03<br />
04<br />
SKIP<br />
VOLT<br />
TC<br />
RTD<br />
DI<br />
DELT<br />
SCL<br />
SQRT<br />
These menus will not be shown on the actual display. These are to make clear which<br />
steps need to be taken to set that parameter. Once you are familiar with the way to<br />
operate the µR1800, these menus may be sufficient to you. Note that most of the menus<br />
used in this manual show the menu of the pen model.<br />
This paragraph describes the setting flows of the three modes. These are Operation<br />
Mode (6.3.1), SET Mode (6.3.2) and SET UP Mode (6.3.3).<br />
6.3.1 Flow Chart of Operation Mode<br />
This flow can be entered by pressing the corresponding function keys.<br />
PRINT<br />
ESC<br />
MENU<br />
(5.3.3)<br />
(5.3.4)<br />
(5.3.8)<br />
MANUAL PRINTOUT START<br />
LIST PRINTOUT START<br />
DISPLAY<br />
FUNCTION<br />
(5.3.6)<br />
(5.3.6)<br />
(5.3.7)<br />
(5.3.5)<br />
(5.3.5)<br />
MANUAL PRINTOUT STOP<br />
LIST PRINTOUT STOP<br />
DISPLAY_AUTO<br />
DISPLAY_MANUAL<br />
DISPLAY_CLOCK<br />
DISPLAY_VIEW<br />
PRINT MESSAGE<br />
CLEAR MESSAGE BUFFER<br />
CLEAR ALARM BUFFER<br />
PRINT SETUP LIST<br />
STOP SETUP LIST<br />
MANUAL CH=1<br />
MESSAGE No.=1<br />
(5.2.2) CHANGE PEN (pen model only)<br />
6 - 3<br />
6. HOW TO ENTER SETTINGS
Change language