Modeles 4370 UR1800 Recorder Instruction Manual
Modeles 4370 UR1800 Recorder Instruction Manual
Modeles 4370 UR1800 Recorder Instruction Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5.3.6 How to Get a Message Printout<br />
The contents of a message must be entered first.<br />
To set or change a message, see 8.2.3.<br />
To get a message printed on the chart, proceed as follows:<br />
Press the MENU-key and select the ‘MENU=SELECT_FUNCTION’ display using the<br />
UP/DOWN-keys. Then press the ENT-key.<br />
Select the ‘PRINT_MESSAGE’ display using the UP/DOWN-keys. Press the ENTkey,<br />
and select which message you want to print out, since up to five messages can be<br />
set. Press the ENT-key and the printing will start.<br />
Note that no messages will be printed when the chart speed exceeds 1500 mm/h, in case<br />
of the pen model, or 100 mm/h in case of the dot model, or when recording is OFF.<br />
When the writing of this printout starts, the display will return to the previous one.<br />
When the writing of this printout is finished, the µR1800 returns to the recording<br />
previously in progress.<br />
You cannot cancel this printout once started.<br />
Messages can be triggered by the keyboard, as described above, and by remote control<br />
(option). When several messages are triggered by remote control in a short time, they<br />
will be stored in a buffer memory before printing on the chart. It is possible to clear this<br />
buffer, which can be useful for example in case the printing will take too much time.<br />
When the buffer is full, this will be indicated by an asterisk ( ) in the latest message<br />
printout. As a result the next message is lost and will not be printed.<br />
To clear the buffer memory, proceed as follows:<br />
Press the MENU-key.<br />
Select the display ‘MENU=SELECT_FUNCTION’ using the UP/DOWN-keys. Press<br />
the ENT-key.<br />
Select the display ‘CLEAR_MESSAGE_BUFFER’ using the UP/DOWN-keys. Press<br />
the ENT-key.<br />
The buffer is cleared. The display will return to the previous one used.<br />
Figure 5.13a Message Printout Example in case of Pen Model<br />
Figure 5.13b Message Printout Example in case of Dot Model<br />
Message printout<br />
NOTE The µR1800 will store up to 5 messages in a buffer memory, regardless whether<br />
recording is ON or OFF. If more messages are generated, the new ones will not be kept<br />
in the buffer memory.<br />
5 - 12 IM 4H3B1-01E
Change language