25.10.2013 Views

REMEDIAL ACTION WORK PLAN OPERABLE UNIT 2, LANDFILL ...

REMEDIAL ACTION WORK PLAN OPERABLE UNIT 2, LANDFILL ...

REMEDIAL ACTION WORK PLAN OPERABLE UNIT 2, LANDFILL ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

-.<br />

UXO Safety Escort<br />

A UXO flashing checklist (Attachment B) will be used during flashing operations.<br />

Perform the flashing in a suitable container such as a 55-gallon drum or an empty<br />

dumpster.<br />

Always anticipate a high order detonation when performing a flashing and ensure that an<br />

appropriate exclusion area is established.<br />

Plan for the worst. Prepare the area to prevent brush fires by removing flammable<br />

vegetation from around the flashing site.<br />

Notifications of the local authorities will be made in accordance with the Site Work Plan.<br />

Have adequate fire fighting equipment in a stand-by status at the site to quickly extinguish<br />

any minor secondary fires before they can get out of hand.<br />

Use a fuel source other than wood and diesel or kerosene. These hydrocarbon fuels can<br />

create a secondary remediation problem if they are allowed to be absorbed into the ground<br />

around the flashing. Consider using some light wood dunnage ignited by a bed made of<br />

bags of Matchlite charcoal. The Matchlite ignites easily, burns very hot, and does not<br />

create any secondary contamination problems.<br />

Ignite all flashings remotely. A bag of black or smokeless powder ignited by an electric<br />

squib is the preferred method.<br />

The flashing must be observed for an additional 30 minutes after the flames and smoke<br />

die out.<br />

Thoroughly inspect the flashing no less than 12 hours after the flame and smoke have died<br />

out. Ensure that the material to be destroyed has been entirely consumed by the flashing<br />

and dispose of the residue.<br />

UXO safety escort services are petformed by IT UXO specialists for the purpose of ensuring the safety<br />

of non-UXO trained field personnel. Typically this service will be required when performing field<br />

inspection or sampling operations in areas suspected of being contaminated with UX.O.<br />

UXO safety escort is not considered to bean intrusive UXO operation and therefore can be petformed<br />

by a single UXO specialist. The two-man rule is not applicable to UXO safety escort operations. The<br />

purpose of providing a UXO safety escort is to ensure the avoidance of UXO and other hazards.<br />

Searching or excavating for UXO is not considered to be a part of the UXO safety escort function.<br />

=--The following procedures will be followed by IT UXO specialists when performing UXO safety escort<br />

Operations:

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!