REMEDIAL ACTION WORK PLAN OPERABLE UNIT 2, LANDFILL ...

,.
..+
PART 2 PRODUCTS
2.1 WATER PD?E
2.1.1
2.1.2
2.1.3
2.1.4
2.1.5
2.2 VALVES
Ductile Iron Pipe: AWWACl51
. Fittings: Ductile iron, standard thickness.
wJoints: AWWA C 111, rubber gasket with rods.
Copper Tubing: ASTM B88, Type ~ annealed
. Fittings: ASME B 16.26, cast copper, or ASME B 16.22, wrought copper.
● Joints: Compression-pattern flared.
PVC Pipe: ASTM D1784, Class 12454B
c Pipe less than 4-inch diameter: ASTMD2241
1. Fittings: ASTM D2464, ASTM D2466, or ASTM D2467.
2. Joints: 150 psi working pressure, 200 psi hydrostatic test pressure
● Pipe 4-inch through 12-inch diameter: AWWA C900, Class 150
“ Pipe 14-inch through 36-inch diameter: AWWA C905
Polyethylene Pipe: AWWA C901
. Fittings: AWWA C901, molded.
● Joints: Butt fusion.
● Trace Wire: Magnetic detectable conductor, brightly colored plastic covering,
imprinted with “Water Service” in large letters.
Steel Pipe: AWWA C200
wFittings: AWWA C208
● Joints: AWWA C200
2.2.1 Gate Valves
● Less than 3 inches: MSS SP-80, Type 1, Class 150, all bronze
. 3 inches and larger: AWWA C500, iron body, bronze trim
2.2.3 Check Valves
● 2 inches and smaller: MSS SP-80, Class 150, Types 3 and 4, all bronze, threaded
“ Larger than 2 inches: iron body, bronze trim, non slam type, Class 125 flanges
conforming to ASME B 16.1
SJH-14-961SACrERCl.lTORDOI.J2\02660 02660-4 Water Lines