25.10.2013 Views

REMEDIAL ACTION WORK PLAN OPERABLE UNIT 2, LANDFILL ...

REMEDIAL ACTION WORK PLAN OPERABLE UNIT 2, LANDFILL ...

REMEDIAL ACTION WORK PLAN OPERABLE UNIT 2, LANDFILL ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

1.4 DOCUMENT FORMATS AND METHODS<br />

1.4.1 Specifications<br />

●<br />

●<br />

●<br />

●<br />

●<br />

●<br />

Format: Although some portions of these specifications may not be in<br />

complete compliance with one format, no particular significance will be<br />

attached to such compliance or non-compliance.<br />

Imperative Language: Except as otherwise indicated, requirements<br />

expressed imperatively are to be performed by Subcontractor.<br />

Overlapping Requirements: Where there is a conflict between or within the<br />

Contract Documents or where compliance with two or more industry<br />

standards or sets of requirements is specified, and the different standards or<br />

requirements establish different levels of quality, the most stringent<br />

requirement is intended, is assumed to have been bid, and will be enforced<br />

without cost to Government. Refer requirements that are different but<br />

approximately equal, and uncertainties as to which quality level is more<br />

stringent to the Government for a decision before proceeding.<br />

Minimum Quality: The quality level shown or specified is intended to be the<br />

minimum for the work. The work may either comply with that minimum<br />

quality (within specified tolerances), or may exceed that minimum quality<br />

within reasonable limits.<br />

Specialists: In certain instances, specification text requires that work is to be<br />

assigned to specialists or expert entities. Such assignments are intended to<br />

establish which party or entity involved in a specific unit or work is<br />

recognized as “expert” for the indicated construction processes or operations.<br />

Nevertheless, the final responsibility for fulfillment of the entire set of contract<br />

requirements remains with the Subcontractor.<br />

Incomplete Sentences or Abbreviations: The language of specifications and<br />

other Contract Documents is of the abbreviated or streamlined type in certain<br />

instances, and implies words and meanings appropriately interpreted.<br />

1.4.2 Drawing Formats<br />

● In some cases, drawings maybe reduced from stated scale or not drawn to<br />

scales. Do not scale drawings.<br />

SJ/5-10-96/SACTERC/lWORDOU2/O 1090 01090-3 References

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!