REMEDIAL ACTION WORK PLAN OPERABLE UNIT 2, LANDFILL ...

1.3
1.4
PART 2
ASTM D2321 Underground Installation of Thermoplastic Pipe for Sewers and Other
Gravity-Flow Applications.
ASTM D3350 Polyethylene (PE) Plastic Pipe and Fittings Materials
City of Salinas (SALINAS) Department of Public Works, Design Standards and Standard
Specifications.
California Department of Transportion (CALTIL4NS), Standard Specifications.
SUBMITTALS
1.3.1 Prepare submittals in accordance with Section 01300, SUBMITTALS.
1.3.2 Submit manufacturer’s data sheets (FIO).
DELIVERY, STORAGE AND HANDLING
1.4.1
1.4.2
2.1 PIPE
Deliver, store and handle materials in accordance with the manufacturer’s instructions
Unload and store materials delivered with a minimum of handling. Do not store
materials directly on the ground. Keep inside of pipes and fittings free of dirt and
debris. Protect gasket and plastic materials from exposure to direct sunlight for
extended periods. Handle materials in such a manner as to insure delive~ to the
trench in sound, undamaged condition.
PRODUCTS
Match pipe to existing size and type.
2.1.1
2.1.2
Concrete pipe: ASTM C76, Class IV; mesh bar reinforcement; bell and spigot end
joints; rubber compression gasket joints conforming to ASTM C443.
Corrugated high density polyethylene (HDPE) Pipe: AASHTO M294, Type S,
Minimum cell class 3 15412C or 324420C, corrugated exterior wall pipe, smooth
interior and with coupling bands or emernal snap couplers covering at least two fill
corrugations on each end of the pipe.
SY5-14-96/SACTERC/lTORDOU2/02720 02720-2 Storm Drainage System