CLI Guide - TP-Link
CLI Guide - TP-Link
CLI Guide - TP-Link
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch <strong>CLI</strong> <strong>Guide</strong><br />
Chapter 16 SSL Commands<br />
SSL(Secure Sockets Layer), a security protocol, is to provide a secure connection for the<br />
application layer protocol(e.g. HT<strong>TP</strong>) based on TCP. Adopting asymmetrical encryption technology,<br />
SSL uses key pair to encrypt/decrypt information. A key pair refers to a public key (contained in the<br />
certificate) and its corresponding private key. By default the switch has a certificate (self-signed<br />
certificate) and a corresponding private key. The Certificate/Key Download function enables the<br />
user to replace the default key pair.<br />
ssl enable<br />
Description<br />
The ssl enable command is used to enable the SSL function on the switch. To<br />
disable the SSL function, please use no ssl enable command. Only the SSL<br />
function is enabled, a secure HT<strong>TP</strong>S connection can be established.<br />
Syntax<br />
ssl enable<br />
no ssl enable<br />
Command Mode<br />
Global Configuration Mode<br />
Example<br />
Enable the SSL function:<br />
<strong>TP</strong>-LINK(config)# ssl enable<br />
ssl download certificate<br />
Description<br />
The ssl download certificate command is used to download a certificate to the<br />
switch from TF<strong>TP</strong> server.<br />
Syntax<br />
ssl download certificate ssl-cert ip-address ip-addr<br />
Parameter<br />
ssl-cert —— The name of the SSL certificate which is selected to download to<br />
the switch. The length of the name ranges from 1 to 25 characters. The<br />
90
Change language