CLI Guide - TP-Link

More documents

Recommendations

Info

TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide Figure 1-4 Port Settings 6. Type the User name and Password in the Hyper Terminal window, the factory default value for both of them is admin. The DOS prompt” TP-LINK>” will appear after pressing the Enter button as figure1-5 shown. It indicates that you can use the CLI now. Figure 1-5 Log in the Switch 1.1.2 Logon by Telnet To log on to the switch by a Telnet connection, please take the following steps: 1. Make sure the switch and the PC are in the same LAN. 2. Click Start → Run to open the Run window. 6
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide Figure 1-6 Open the Run window 3. Type cmd in the prompt Run window as figure 1-7 and click OK. Figure 1-7 Run Window 4. Type telnet 192.168.0.1 in the command prompt shown as figure1-8, and press the Enter button. 7
Page 1 and 2: TL-SL3428/TL-SL3452 JetStream L2 Ma
Page 17: TL-SL3428/TL-SL3452 JetStream L2 Ma
Page 39 and 40: switchport voice-vlan mode TL-SL342
Page 55 and 56: user modify type TL-SL3428/TL-SL345
Page 69 and 70:
TL-SL3428/TL-SL3452 JetStream L2 Ma
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
show arp detection statistic TL-SL3
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
logging local flash TL-SL3428/TL-SL
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
idge aging-time TL-SL3428/TL-SL3452
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
ip management-vlan TL-SL3428/TL-SL3
Page 115 and 116:
user-config backup TL-SL3428/TL-SL3
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
snmp view-add TL-SL3428/TL-SL3452 J
Page 185 and 186:
snmp user-add TL-SL3428/TL-SL3452 J
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
show snmp-rmon alarm TL-SL3428/TL-S
Page 201 and 202:
Page 203 and 204:
cluster manage role-change TL-SL342
Page 205 and 206:
show all

CLI Guide - TP-Link

Create successful ePaper yourself

Delete template?

Save as template?