CLI Guide - TP-Link
CLI Guide - TP-Link
CLI Guide - TP-Link
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch <strong>CLI</strong> <strong>Guide</strong><br />
Syntax<br />
interface range link-aggregation group-list<br />
no interface range link-aggregation group-list<br />
Command Mode<br />
Global Configuration Mode<br />
Parameter<br />
group-list ——The aggregation group list. You can configure some aggregation<br />
groups at the same time.<br />
Example<br />
Access the Interface range <strong>Link</strong>-aggregation Mode and configure the<br />
aggregation group 1,4-6:<br />
<strong>TP</strong>-LINK(config)# interface range link-aggregation 1,4-6<br />
<strong>TP</strong>-LINK(config-if)#<br />
link-aggregation<br />
Description<br />
The link-aggregation command is used to add the current Ethernet port to an<br />
aggregation group. To remove the current Ethernet port from the aggregation<br />
group, please use no link-aggregation command.<br />
Syntax<br />
link-aggregation group-num<br />
no link-aggregation<br />
Parameter<br />
group-num ——The LAG number, ranging from1 to 14.<br />
Command Mode<br />
Interface Configuration Mode(interface ethernet / interface range ethernet)<br />
Example<br />
Add the Ethernet port 2-4 to aggregation group 1:<br />
<strong>TP</strong>-LINK(config)# interface range ethernet 2-4<br />
<strong>TP</strong>-LINK(config-if)#link-aggregation 1<br />
34