CLI Guide - TP-Link
CLI Guide - TP-Link
CLI Guide - TP-Link
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Parameter<br />
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch <strong>CLI</strong> <strong>Guide</strong><br />
protocol-vlan vlan vid template index<br />
no protocol-vlan entry-id<br />
vid ——VLAN ID,ranging from 1-4094.<br />
index ——The number of the Protocol template. You can get the template<br />
corresponding to the number by the show protocol-vlan template command.<br />
entry-id ——The number of the Protocol VLAN . You can get the Protocol VLAN<br />
entry corresponding to the number by the show protocol-vlan vlan command.<br />
Command Mode<br />
Example<br />
Global Configuration Mode<br />
Create a Protocol VLAN entry, whose index is 1 and vid is 2. And then delete the<br />
Protocol VLAN entry whose number is 1:<br />
<strong>TP</strong>-LINK(config)# protocol-vlan vlan 2 template 1<br />
<strong>TP</strong>-LINK(config)# no protocol-vlan vlan 1<br />
protocol-vlan interface<br />
Description<br />
Syntax<br />
Parameter<br />
The protocol-vlan interface command is used to enable the Protocol VLAN<br />
feature for a specified port. To disable the Protocol VLAN feature of this port,<br />
please use no protocol-vlan interface command. By default, the Protocol<br />
VLAN feature of all ports is disabled.<br />
protocol-vlan vlan interface port-list<br />
no protocol-vlan interface [port-list]<br />
port-list ——The port numbers needed to be edited or canceled.<br />
Command Mode<br />
Example<br />
Global Configuration Mode<br />
Enable the Protocol VLAN feature for the ports 1、4-6、9-11:<br />
<strong>TP</strong>-LINK(config)# protocol-vlan vlan interface 1,4-6,9-11<br />
22