CLI Guide - TP-Link
CLI Guide - TP-Link
CLI Guide - TP-Link
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
show logging buffer<br />
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch <strong>CLI</strong> <strong>Guide</strong><br />
Description<br />
The show logging buffer level command is used to display the log information<br />
in the log buffer according to the severity level.<br />
Syntax<br />
show logging buffer level [level]<br />
Parameter<br />
level ——Severity level. There are 8 severity levels marked with values 0-7. The<br />
information will be displayed only when the log with the same or smaller severity<br />
level value. Display all the log information in the log buffer by default.<br />
Command Mode<br />
Any Configuration Mode<br />
Example<br />
Display the log information from level 0 to level 5 in the log buffer:<br />
<strong>TP</strong>-LINK(config)# show logging buffer level 5<br />
show logging flash<br />
Description<br />
The show logging flash level command is used to display the log information<br />
in the log file according to the severity level.<br />
Syntax<br />
show logging flash level [level]<br />
Parameter<br />
level ——Severity level. There are 8 severity levels marked with values 0-7. The<br />
information will be displayed only when the log with the same or smaller severity<br />
level value. Display all the log information in the log file by default.<br />
Command Mode<br />
Any Configuration Mode<br />
Example<br />
84