CLI Guide - TP-Link
CLI Guide - TP-Link
CLI Guide - TP-Link
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch <strong>CLI</strong> <strong>Guide</strong><br />
Interface Configuration Mode(interface ethernet / interface range ethernet)<br />
Example<br />
Enable LACP protocol on the port 1:<br />
<strong>TP</strong>-LINK(config)# interface ethernet 1<br />
<strong>TP</strong>-LINK(config-if)# lacp<br />
lacp admin-key<br />
Description<br />
The lacp admin-key command is used to configure the admin key. To restore<br />
the default value, please use no lacp admin-key command.<br />
Syntax<br />
lacp admin-key value<br />
no lacp admin-key<br />
Parameter<br />
value —— admin key, ranging from 0 to 65535. By default, the value is 1.<br />
Command Mode<br />
Interface Configuration Mode(interface ethernet / interface range ethernet)<br />
Example<br />
Configure the admin key of port 1 as 1024:<br />
<strong>TP</strong>-LINK(config)# interface ethernet 1<br />
<strong>TP</strong>-LINK(config-if)# lacp admin-key 1024<br />
lacp port-priority<br />
Description<br />
The lacp port-priority command is used to set the priority of the current port. To<br />
restore to the default priority, please use no lacp port-priority command.<br />
Syntax<br />
lacp port-priority value<br />
no lacp port-priority<br />
38
Change language